GSM-Forum - View Single Post - SM-G570F not power on after reset FRP [Answered]

gsm_shamim · 12-11-2017, 05:54

Welcome to Octoplus Box Samsung software version 2.6.3
-----------------------------------------------------------------------------------
To connect SM-G570F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM7
Selected model: SM-G570F
Searching for a phone. Please wait...
Proper android device not found. Make shure that "USB debug" option on the device is turned on.
Operation was failed!
Performed by 2.6.3 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM7
Selected model: SM-G570F
Searching for UART interface.. COM7
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM7
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.3 Software version.

12-11-2017, 05:54	#1 (permalink)
gsm_shamim No Life Poster Join Date: Nov 2012 Location: Bangladesh Posts: 682 Member: 1845954 Status: Offline Sonork: 100.1622497 Thanks Meter: 397	SM-G570F not power on after reset FRP [Answered] Welcome to Octoplus Box Samsung software version 2.6.3 ----------------------------------------------------------------------------------- To connect SM-G570F phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM7 Selected model: SM-G570F Searching for a phone. Please wait... Proper android device not found. Make shure that "USB debug" option on the device is turned on. Operation was failed! Performed by 2.6.3 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM7 Selected model: SM-G570F Searching for UART interface.. COM7 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM7 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock (1/4 attempt)..success FRP / Reactivation lock is successfully reseted! Performed by 2.6.3 Software version. Last edited by Octopus box; 12-11-2017 at 09:12.