GSM-Forum - View Single Post - samsung j100h emmc repaire done with jtag

zone3 · 12-28-2017, 04:58

emmc info as below

---------- eMMC Device Information ----------

EMMC CID : 90014A483447326211010ED8E61432FA
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 03/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 249095700
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: H4G2b _ 249095700_20171228_0902.extcsd
Done.

emmc flashing tried-error as in below link

http://forum.gsmhosting.com/vbb/f672...-help-2313839/

what i do as a next step?

12-28-2017, 04:58	#41 (permalink)
zone3 No Life Poster Join Date: Jan 2009 Posts: 3,260 Member: 946381 Status: Offline Thanks Meter: 150	j100h boot dead-emmc info posted-help me emmc info as below ---------- eMMC Device Information ---------- EMMC CID : 90014A483447326211010ED8E61432FA EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA EMMC Manufacturer ID: 0090 , OEM ID: 014A EMMC Date: 03/2015 Rev.0x1 EMMC NAME: H4G2b , S/N: 249095700 EMMC NAME (HEX): 48344732622000 EMMC ROM1 (Main User Data) Capacity: 3728 MB EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.6 (MMC 4.5) Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1) Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08. H/W reset function [RST_N_FUNCTION]: 0x00 High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Backup saved: H4G2b _ 249095700_20171228_0902.extcsd Done. emmc flashing tried-error as in below link http://forum.gsmhosting.com/vbb/f672...-help-2313839/ what i do as a next step?