NOKIA 130 FLASHING DONE Code:
Core : v2.29 , MTKx FlashEngine : v14.0
Verify files ...
MAUI : RM-1035_ROM_eMP_10.02.11
VIVA : RM-1035_VIVA_eMP_10.02.11
LANG : RM-1035_LANG_PACK_ROM_AZ_eMP_10.02.11_001
CUST : RM-1035_CUSTPACK_ROM_AZ_EURO_AZ_eMP_10.02.11_001
JMPT : RM-1035_JUMP_TABLE_AZ_EURO_AZ_eMP_10.02.11_001
- > MODE : FullFlash
Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!
--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 73 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 4E6926D23A90C4501A6A04610351311D
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_ROM_eMP_10.02.11
SecureDecrypt : RM-1035_VIVA_eMP_10.02.11
SecureDecrypt : RM-1035_LANG_PACK_ROM_AZ_eMP_10.02.11_001
SecureDecrypt : RM-1035_CUSTPACK_ROM_AZ_EURO_AZ_eMP_10.02.11_001
SecureDecrypt : RM-1035_JUMP_TABLE_AZ_EURO_AZ_eMP_10.02.11_001
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.01.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_ROM_eMP_10.02.11
Write : RM-1035_LANG_PACK_ROM_AZ_eMP_10.02.11_001
Write : RM-1035_CUSTPACK_ROM_AZ_EURO_AZ_eMP_10.02.11_001
Write : RM-1035_JUMP_TABLE_AZ_EURO_AZ_eMP_10.02.11_001
Write : RM-1035_VIVA_eMP_10.02.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_ROM_eMP_10.02.11
[VERIFY] DONE : RM-1035_LANG_PACK_ROM_AZ_eMP_10.02.11_001
[VERIFY] DONE : RM-1035_CUSTPACK_ROM_AZ_EURO_AZ_eMP_10.02.11_001
[VERIFY] DONE : RM-1035_JUMP_TABLE_AZ_EURO_AZ_eMP_10.02.11_001
[VERIFY] DONE : RM-1035_VIVA_eMP_10.02.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Rebooting phone now
Flashing done!
Total flash time : 00:00:51
Reboot phone Ok
- > Hint : If phone shows Battery charge icon - press and hold PowerOn button 10 seconds
Wait, when phone will be ready ...
Reading Phone Info....
Software Info: 10.02.11 00-00-00 RM-1035
IMEI: 35XXXXXXXXXXXX
Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul 1 02:50:44 2013 U 69b804d5
PPM version : AZ
Product code: 059W041
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
EXTRACT PHONEBOOK Code:
Connect phone on selected interface...
[MTK] : Extract PhoneBook from file : 356873073661100_MTKx.bin
[PROCESS] : Sorting Data [1/3]
[PROCESS] : Extract Data [2/3]
[PROCESS] : Decrypt Data [3/3]
[EXTRACT] : Ok, 75 records found!
[INFO] PhoneBook Memory : 500 , Used : 75
CSV Saved to : C:\Users\HJH\Desktop\driver\35XXXXXXXX_MTKx.csv
MBAK Saved to : C:\Users\HJH\Desktop\driver\35XXXXXXXX_MTKx.csv
[INFO] : MBAK Info :
Create folder "Backup" on SDcard. Put this file in SDcard to folder /Backup/
Inserd card in phone, make "Restore backup" from Settings->Backup
Done