GSM-Forum - View Single Post - SM-G935F FRP removed successfully, great job, Octoplus

khalidsuper · 01-17-2018, 14:26

Welcome to Octoplus FRP Tool v.1.0.9
Platform: SAMSUNG
Selected model: SM-G935F
To put SM-G935F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM7
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.0.9 Software version.

01-17-2018, 14:26	#1 (permalink)
khalidsuper Banned Join Date: Sep 2016 Location: living on the edge Posts: 591 Member: 2620145 Status: Offline Thanks Meter: 319	SM-G935F FRP removed successfully, great job, Octoplus Welcome to Octoplus FRP Tool v.1.0.9 Platform: SAMSUNG Selected model: SM-G935F To put SM-G935F into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Phone found. Initializing.. PIT was read successfully. Searching for UART interface.. COM7 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 1.0.9 Software version. Last edited by Octopus box; 01-17-2018 at 16:00.