GSM-Forum - View Single Post - 🐙 Post here success Reset FRP story with Octoplus FRP Tool

imran78669 · 01-17-2018, 19:06

Welcome to Octoplus FRP Tool v.1.0.9
Platform: SAMSUNG
Selected model: SM-G935F
To put SM-G935F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM7
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.0.9 Software version

01-17-2018, 19:06	#107 (permalink)
imran78669 No Life Poster Join Date: Apr 2009 Location: MUSLIMS NOT A TERRIORST Age: 46 Posts: 818 Member: 1016083 Status: Offline Thanks Meter: 103	🐙 Successfully Done Reset FRP at SM-G935F Welcome to Octoplus FRP Tool v.1.0.9 Platform: SAMSUNG Selected model: SM-G935F To put SM-G935F into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Phone found. Initializing.. PIT was read successfully. Searching for UART interface.. COM7 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 1.0.9 Software version Last edited by Octopus box; 01-18-2018 at 06:53.