| No Life Poster
Join Date: Nov 2008 Location: saudi arabia
Posts: 3,840
Member: 904809
Status: Offline Sonork: 100.1615464 Thanks Meter: 738 | SM-G531H after repair still "dead" [Answered]
Welcome to Medusa Pro Software version 1.5.2.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic EMV Smartcard Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G531H
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G531H_EMMC_P1J95K.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
ERROR[001]: Can not connect. No target device present.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G531H
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G531H_EMMC_P1J95K.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Micron eMMC P1J95K
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : FE014E50314A39354B131DCD5131624D
Manufacturer ID : 0XFE
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4E
Product name : P1J95K
Product revision : 1.3
Product serial number : (hex) 1DCD5131
Manufacturing date : 06/2015
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5913FFFFFFFFEF924000A3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 8192 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 638976
Number of sectors : 3072000
Device Manufacturer : samsung
Device Platform : sc8830
Build ID : LMY48B
Display Build ID : LMY48B.G531HDDU0AOH2
Release ID : 5.1.1
Device Model : SM-G531H
Device Name : grandprimeve3gxx
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : grandprimeve3gxx-user 5.1.1 LMY48B G531HDDU0AOH2 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/P1J95K_25_01_2018_09_09_05.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.2; FW: 1.22.
P00: GPT (00000000, 00002000) 4 MB
P01: sboot (00002000, 00001000) 2048 KB
P02: sboot2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: wdsp (00006000, 00002000) 4 MB
P08: modem (00008000, 00004000) 8 MB
P09: modem2 (0000C000, 00004000) 8 MB
P10: tddsp (00010000, 00002000) 4 MB
P11: fota_sig (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: param (00014800, 00001000) 2048 KB
P17: efs (00015800, 0000A000) 20 MB
P18: prodnv (0001F800, 00002800) 5 MB
P19: reserved2 (00022000, 00001000) 2048 KB
P20: kernel (00023000, 00008000) 16 MB
P21: recovery (0002B000, 00008000) 16 MB
P22: persistent (00033000, 00000800) 1024 KB
P23: persdata (00033800, 00004800) 9 MB
P24: cache (00038000, 00064000) 200 MB
P25: system (0009C000, 002EE000) 1500 MB
P26: hidden (0038A000, 0000F000) 30 MB
P27: userdata (00399000, 00AF6FDF) 5.482 GB
Erasing partition GPT... Done.
Erasing partition sboot... Done.
Erasing partition sboot2... Done.
Erasing partition wfixnv1... Done.
Erasing partition wfixnv2... Done.
Erasing partition tdfixnv1... Done.
Erasing partition tdfixnv2... Done.
Erasing partition wdsp... Done.
Erasing partition modem... Done.
Erasing partition modem2... Done.
Erasing partition tddsp... Done.
Erasing partition fota_sig... Done.
Erasing partition wruntimenv1... Done.
Erasing partition wruntimenv2... Done.
Erasing partition tdruntimenv1... Done.
Erasing partition tdruntimenv2... Done.
Erasing partition param... Done.
Erasing partition prodnv... Done.
Erasing partition reserved2... Done.
Erasing partition kernel... Done.
Erasing partition recovery... Done.
Erasing partition persistent... Done.
Erasing partition persdata... Done.
Erasing partition cache... Done.
Erasing partition system... Done.
Erasing partition hidden... Done.
Erasing partition userdata... Done.
Erasing is finished.
SW: 1.5.2; FW: 1.22.
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G531H_EMMC_P1J95K.srf".
Write data verification is enabled.
Switched to boot area partition 1.
Writing BOOT1 partition... Done.
Switched to user area.
Writing GPT partition... Done.
Writing SBOOT partition... Done.
Writing SBOOT2 partition... Done.
Writing wfixnv1 partition... Done.
Writing wfixnv2 partition... Done.
Writing tdfixnv1 partition... Done.
Writing tdfixnv2 partition... Done.
Writing WDSP partition... Done.
Writing MODEM partition... Done.
Writing MODEM2 partition... Done.
Writing TDDSP partition... Done.
Writing FOTA_SIG partition... Done.
Writing wruntimenv1 partition... Done.
Writing wruntimenv2 partition... Done.
Writing tdruntimenv1 partition... Done.
Writing tdruntimenv2 partition... Done.
Writing PARAM partition... Done.
Writing efs partition... Done.
Writing prodnv partition... Done.
Writing RESERVED2 partition... Done.
Writing KERNEL partition... Done.
Writing RECOVERY partition... Done.
Writing PERSISTENT partition... Done.
Writing persdata partition... Done.
Smart Repair is successfully complete.
SW: 1.5.2; FW: 1.22.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G531H
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G531H_EMMC_P1J95K.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Micron eMMC P1J95K
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : FE014E50314A39354B131DCD5131624D
Manufacturer ID : 0XFE
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4E
Product name : P1J95K
Product revision : 1.3
Product serial number : (hex) 1DCD5131
Manufacturing date : 06/2015
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5913FFFFFFFFEF924000A3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 8192 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/P1J95K_25_01_2018_09_13_19.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.2; FW: 1.22.
P00: GPT (00000000, 00002000) 4 MB
P01: SBOOT (00002000, 00001000) 2048 KB
P02: SBOOT2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: WDSP (00006000, 00002000) 4 MB
P08: MODEM (00008000, 00004000) 8 MB
P09: MODEM2 (0000C000, 00004000) 8 MB
P10: TDDSP (00010000, 00002000) 4 MB
P11: FOTA_SIG (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: PARAM (00014800, 00001000) 2048 KB
P17: efs (00015800, 0000A000) 20 MB
P18: prodnv (0001F800, 00002800) 5 MB
P19: RESERVED2 (00022000, 00001000) 2048 KB
P20: KERNEL (00023000, 00008000) 16 MB
P21: RECOVERY (0002B000, 00008000) 16 MB
P22: PERSISTENT (00033000, 00000800) 1024 KB
P23: persdata (00033800, 00004800) 9 MB
P24: CACHE (00038000, 00064000) 200 MB
P25: SYSTEM (0009C000, 002EE000) 1500 MB
P26: HIDDEN (0038A000, 0000F000) 30 MB
P27: userdata (00399000, 00AF0000) 5.469 GB
Factory Format will erase all eMMC data!
Do you want to continue? No.
Please select file.
Boot config succesfully changed!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G531H
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G531H_EMMC_P1J95K.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Micron eMMC P1J95K
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : FE014E50314A39354B131DCD5131624D
Manufacturer ID : 0XFE
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4E
Product name : P1J95K
Product revision : 1.3
Product serial number : (hex) 1DCD5131
Manufacturing date : 06/2015
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5913FFFFFFFFEF924000A3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 8192 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/P1J95K_25_01_2018_09_16_08.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.2; FW: 1.22.
P00: GPT (00000000, 00002000) 4 MB
P01: SBOOT (00002000, 00001000) 2048 KB
P02: SBOOT2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: WDSP (00006000, 00002000) 4 MB
P08: MODEM (00008000, 00004000) 8 MB
P09: MODEM2 (0000C000, 00004000) 8 MB
P10: TDDSP (00010000, 00002000) 4 MB
P11: FOTA_SIG (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: PARAM (00014800, 00001000) 2048 KB
P17: efs (00015800, 0000A000) 20 MB
P18: prodnv (0001F800, 00002800) 5 MB
P19: RESERVED2 (00022000, 00001000) 2048 KB
P20: KERNEL (00023000, 00008000) 16 MB
P21: RECOVERY (0002B000, 00008000) 16 MB
P22: PERSISTENT (00033000, 00000800) 1024 KB
P23: persdata (00033800, 00004800) 9 MB
P24: CACHE (00038000, 00064000) 200 MB
P25: SYSTEM (0009C000, 002EE000) 1500 MB
P26: HIDDEN (0038A000, 0000F000) 30 MB
P27: userdata (00399000, 00AF0000) 5.469 GB
Selected pit file: C:/Users/alkhaleejmobile/Desktop/g531h.pit
Open file "C:/Users/alkhaleejmobile/Desktop/g531h/G531HDDU0APK2_G531HODD0APK2_G531HDDU0APK1_HOME.tar .md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition BOOT... Done.
Switched to user area.
Writing partition SBOOT... Done.
Writing partition SBOOT2... Done.
Writing partition WDSP... Done.
Writing partition MODEM... Done.
Writing partition KERNEL... Done.
Writing partition RECOVERY... Done.
Writing partition CACHE... Done.
Writing partition SYSTEM... Done.
Writing partition HIDDEN... Done.
Writing is finished.
SW: 1.5.2; FW: 1.22.
Last edited by Medusa Box; 01-25-2018 at 06:40.
|