GSM-Forum - View Single Post - 🐙 Post here success Reset FRP story with Octoplus FRP Tool

LuffyStrawHat · 02-25-2018, 11:37

Platform: SAMSUNG
Selected model: SM-A310FD
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/2 attempt)..unsuccessful
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (2/2 attempt)..unsuccessful
This version of "sBoot" is not supported, try to change "sBoot"!
Operation was failed!
Performed by 1.1.3 Software version.

Selected AP file: C:\Users\Luffy StrawHat\Desktop\COMBINATION_FAC_FA51_A310FXXU3AQC 1_FAC3AQC1_CL6964464_QB13042963_REV00_user_mid_nos hip.tar.md5
Platform: SAMSUNG
Selected model: SM-A310FD
Please put the phone into Download Mode and connect USB cable.
To put SM-A310FD into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing Firmware Failed
Performed by 1.1.3 Software version.

Platform: SAMSUNG
Selected model: SM-A310FD
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/2 attempt)..success
FRP lock is successfully reseted!
Performed by 1.1.3 Software version.

02-25-2018, 11:37	#248 (permalink)
LuffyStrawHat Insane Poster Join Date: Dec 2016 Location: world Age: 25 Posts: 74 Member: 2664783 Status: Offline Thanks Meter: 70	SM-A310FD Reset FRP successfully done Platform: SAMSUNG Selected model: SM-A310FD Searching for UART interface.. COM3 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM3 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock (1/2 attempt)..unsuccessful Searching for UART interface.. COM3 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock (2/2 attempt)..unsuccessful This version of "sBoot" is not supported, try to change "sBoot"! Operation was failed! Performed by 1.1.3 Software version. Selected AP file: C:\Users\Luffy StrawHat\Desktop\COMBINATION_FAC_FA51_A310FXXU3AQC 1_FAC3AQC1_CL6964464_QB13042963_REV00_user_mid_nos hip.tar.md5 Platform: SAMSUNG Selected model: SM-A310FD Please put the phone into Download Mode and connect USB cable. To put SM-A310FD into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Firmware write started. Writing BOOT section... BOOT section has been written successfully. Writing Firmware Failed Performed by 1.1.3 Software version. Platform: SAMSUNG Selected model: SM-A310FD Searching for UART interface.. COM3 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM3 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock (1/2 attempt)..success FRP lock is successfully reseted! Performed by 1.1.3 Software version. Last edited by Octopus box; 02-25-2018 at 12:00.