03-18-2018, 17:53
|
#1 (permalink)
|
| No Life Poster
Join Date: Jan 2009 Location: cameroon
Posts: 1,773
Member: 953931
Status: Offline Sonork: 1652252 Thanks Meter: 897 |  world first tecno phantom 8 AX8 READ INFO AND FIRMWARE BY CS-TOOLL
WORLD FIRST TECNO PHANTOM 8 AX8 READ INFO AND FIRMWARE BY CS-TOOL
Code: Action : Read Info
Tips:
1.Remove Battery, Insert usb cable, Insert battery
2.power off Phone, Remove & Reinsert Battery , insert USB Cable
(In Case Some Phone Required to hold bootkey)
Waiting for Phone Usb...
Phone found [ USB Port:COM7 ]
Connecting...
Connection Done.
Read CPU Info...
CPU_SW: 0001
CPU_HW: CB00
CPU_ID: 0551[MT6757]
BV: 02
SecConf: 00000000
uploading boot image to RAM...
Handshake received from Phone.
Getting connection agent status:preloader
Send boot2 ...
Receive SYNC signal, Boot2 runs normally.
Getting RAM info ...
SRAM: type[0x2] base_address[0x200000] size[0x50000]
DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
Getting H/W info ...
CHIP : MT6757
CPU ID :
EMMC ID : 150100334836434D42059514DCCEA401
EMMC Size: 64GB, usable capacity: 58,25GB
EMMC Name: eMMC_Samsung_3H6CMB
Boot Information completed.
Reading Project Property ...
Brand : TECNO
Phone Model : TECNO AX8
Android Ver : 7.0
CPU/Processor : MT6757
MTK Project ver: AX8-H571B-N-171128V243
SW Version : AX8-H571B-N-171128V243
Userdata State : Encrypted
Action completed
Time taken : 00:00:10
Reconnect Battery/USB Cable
CS-Tool Ver 1.60  
|
|
|  |