[4G Telecom]

Coolpad 8297-L100 Flashing Stuck on 11% Recover Done
Thanks Mr.royalnasim


Logs...............

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 18 Mhz
CMD Pullup Level: 1988 mV
CMD Active Level: 2424 mV
EMMC Device Information :
EMMC CID: 90014A4838473165050744C65DBE5221
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G1e , EMMC NAME (HEX): 483847316500 , S/N: 44C65DBE , rev. 0x07
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 5/2015
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G1e_44C65DBE_20180326_144301.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: modem, [000002000000 - 000006000000], size: 000004000000
Partition: sbl1, [000006000000 - 000006080000], size: 000000080000
Partition: sbl1bak, [000006080000 - 000006100000], size: 000000080000
Partition: aboot, [000006100000 - 000007000000], size: 000000F00000
Partition: abootbak, [000007000000 - 000007F00000], size: 000000F00000
Partition: rpm, [000007F00000 - 000007F80000], size: 000000080000
Partition: rpmbak, [000007F80000 - 000008000000], size: 000000080000
Partition: tz, [000008000000 - 000008080000], size: 000000080000
Partition: tzbak, [000008080000 - 000008100000], size: 000000080000
Partition: hyp, [000008100000 - 000008180000], size: 000000080000
Partition: hypbak, [000008180000 - 000008200000], size: 000000080000
Partition: pad, [000008200000 - 000008300000], size: 000000100000
Partition: modemst1, [000008300000 - 000008480000], size: 000000180000
Partition: modemst2, [000008480000 - 000008600000], size: 000000180000
Partition: misc, [000008600000 - 000008700000], size: 000000100000
Partition: fsc, [000008700000 - 000008700400], size: 000000000400
Partition: ssd, [000008700400 - 000008702400], size: 000000002000
Partition: DDR, [00000A000000 - 00000A008000], size: 000000008000
Partition: fsg, [00000A008000 - 00000A188000], size: 000000180000
Partition: sec, [00000A188000 - 00000A18C000], size: 000000004000
Partition: boot, [00000A18C000 - 00000B58C000], size: 000001400000
Partition: params, [00000C000000 - 00000C100000], size: 000000100000
Partition: panic, [00000C100000 - 00000D500000], size: 000001400000
Partition: autobak, [00000D500000 - 00000DF00000], size: 000000A00000
Partition: system, [00000E000000 - 00008E000000], size: 000080000000
Partition: persist, [00008E000000 - 00008EA00000], size: 000000A00000
Partition: cache, [00008EA00000 - 000096A00000], size: 000008000000
Partition: recovery, [000096A00000 - 000097E00000], size: 000001400000
Partition: userdata, [000097E00000 - 0001D1FFBE00], size: 00013A1FBE00
GPT header successfully parsed

Get firmware version

Brand = Coolpad
Manufacturer = YuLong
Model = Coolpad 8297L-I00
Phone platform = msm8916
CPU Abi = armeabi-v7a
Android release = 4.4.4
Firmware version = 4.4.150.00.T1.150528.KTU84P
Firmware date = 2015? 05? 28? ??? 01:31:55 CST