View Single Post
Old 04-08-2018, 23:04   #14522 (permalink)
..::GMSR::..
No Life Poster
 
..::GMSR::..'s Avatar
 
Join Date: Nov 2010
Location: RSA-2048
Age: 38
Posts: 1,716
Member: 1444462
Status: Offline
Thanks Meter: 1,337
Talking Stylo_S551 Read Firmware & FRP Reset Done

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM107))
Preparing to start flash mode;
Preparing to open COM107
Connecting;
Downloading DA;
Initializing;
Rid: 5f76d35baaf4c94b1cca58ae113fc014
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem160.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM15;
DEVICE INFO:
BB CHIP: MT6580 [CA00, 00, 6580, 05]
HW_STORAGE_EMMC: 0x46000115 0x4D32584E 0xCA680142 0x5B24E5DC [SIZE=0x1D2880000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xCA000000 SIZE: 0x106F80000


Getting partitions info;
Reading info;
Partitions info:
[0x00080000-0x00300000]-[proinfo]
[0x00380000-0x00500000]-[nvram]
[0x00880000-0x00A00000]-[protect1]
[0x01280000-0x00A00000]-[protect2]
[0x01C80000-0x00040000]-[seccfg]
[0x01CC0000-0x00060000]-[lk]
[0x01D20000-0x01000000]-[boot]
[0x02D20000-0x01000000]-[recovery]
[0x03D20000-0x00080000]-[para]
[0x03DA0000-0x00800000]-[logo]
[0x045A0000-0x00A00000]-[expdb]
[0x04FA0000-0x00100000]-[frp]
[0x050A0000-0x00500000]-[tee1]
[0x055A0000-0x00500000]-[tee2]
[0x05AA0000-0x02000000]-[nvdata]
[0x07AA0000-0x02560000]-[metadata]
[0x0A000000-0x00200000]-[oemkeystore]
[0x0A200000-0x00600000]-[secro]
[0x0A800000-0x00800000]-[keystore]
[0x0B000000-0xAF000000]-[system]
[0xBA000000-0x10000000]-[cache]
[0xCA000000-0x106F80000]-[userdata]
[0x1D0F80000-0x01000000]-[flashinfo]

Reading full dump;
Contents saved to :
C:\Users\Dream\Desktop\MEMORY_DUMP_Stylo_S551_5f76 d35baaf4c94b1cca58ae113fc014.osp

Time needed - 01:28:00

Log file saved to: LOG_6_04_2018_11_32_05.txt









Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM107))
Preparing to start flash mode;
Preparing to open COM107
Connecting;
Downloading DA;
Initializing;
Rid: 5f76d35baaf4c94b1cca58ae113fc014
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem160.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM15;
DEVICE INFO:
BB CHIP: MT6580 [CA00, 00, 6580, 05]
HW_STORAGE_EMMC: 0x46000115 0x4D32584E 0xCA680142 0x5B24E5DC [SIZE=0x1D2880000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xCA000000 SIZE: 0x106F80000


Factory Reset Protection successfully removed !


Time needed - 00:00:00

Log file saved to: LOG_6_04_2018_09_38_25.txt


  Reply With Quote
 
Page generated in 0.08088 seconds with 7 queries