GSM-Forum - View Single Post - QMobile X700 PRO Lite Read Factory Firmware Done

Akhtar Ali Jatt · 05-24-2018, 11:40

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM74)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A483847316505 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM75)
-Reading GPT Drive OK
Build ID: MRA58K
Display ID: MRA58K release-keys
Version: 6.0
Build Date: Tue Nov 29 12:12:16 CST 2016
Model: QMobile X700 PRO Lite
Brand: QMobile
Device: X700_PRO_Lite
Manufacturer: QMobile
Mediatek Version Release: ALPS.W10.24.p0
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 355554080923573
IMEI[2] from NVRAM: 355554085923578
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xa800000 - LEN: 0xb3800000
Saved to : C:\Users\AkhtarAli\Documents\Android_MTK\firmware_ backup\MT6580_EMMC_QMobile_QMobile X700 PRO Lite_6_0_ALPS_W10_24_p0(2018_05_24_15_26)
Wait untill phone will start charging.
All done.

05-24-2018, 11:40	#1 (permalink)
Akhtar Ali Jatt No Life Poster Join Date: Jan 2009 Location: Sindh Pakistan Posts: 8,885 Member: 953334 Status: Offline Sonork: 100.1614005 Thanks Meter: 15,428	QMobile X700 PRO Lite Read Factory Firmware Done Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM74) Boot mode: Preloader Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6580 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 EMMC FW VERSION: 07:00:00:00:00:00:00:00 EMMC CID: 90014A483847316505 : 00000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2c00000 [7.293 GB] Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM (Android) (COM75) -Reading GPT Drive OK Build ID: MRA58K Display ID: MRA58K release-keys Version: 6.0 Build Date: Tue Nov 29 12:12:16 CST 2016 Model: QMobile X700 PRO Lite Brand: QMobile Device: X700_PRO_Lite Manufacturer: QMobile Mediatek Version Release: ALPS.W10.24.p0 Dumping Preloader. Start dumping flash, this can take up to 1 hour....... Start processing proinfo Reading: BEGIN: 0x80000 - LEN: 0x300000 Start processing nvram IMEI[1] from NVRAM: 355554080923573 IMEI[2] from NVRAM: 355554085923578 Start processing protect1 ...... Reading: BEGIN: 0x880000 - LEN: 0xa00000 Start processing protect2 ...... Reading: BEGIN: 0x1280000 - LEN: 0xa00000 Start processing lk ...... Start processing boot Start processing recovery Start processing logo ...... Start processing frp ...... Reading: BEGIN: 0x4fa0000 - LEN: 0x100000 Start processing nvdata ...... Reading: BEGIN: 0x50a0000 - LEN: 0x2000000 Start processing secro Reading: BEGIN: 0x9a00000 - LEN: 0x600000 Start processing system Reading: BEGIN: 0xa800000 - LEN: 0xb3800000 Saved to : C:\Users\AkhtarAli\Documents\Android_MTK\firmware_ backup\MT6580_EMMC_QMobile_QMobile X700 PRO Lite_6_0_ALPS_W10_24_p0(2018_05_24_15_26) Wait untill phone will start charging. All done.