GSM-Forum - View Single Post

najim uddin · 05-30-2018, 10:30

dead boot repair ok but no power

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.49 (RIFFBOX2), JTAG Manager Version: 1.78

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 2.81V, SD_CLK Frequency is 3.4 MHz

Detected eMMC Chip, ID: 0x90/0x4A (H4G2b ), User Area Partition = 0x0000E9000000 Bytes (3.64 GB)

Selected Resurrection Data for the eMMC Chip with Capacity = 3.64 GB

Flashing the dead body...OK
Resurrection complete!

05-30-2018, 10:30	#1 (permalink)
najim uddin Freak Poster Join Date: Jul 2008 Location: Chittagong Posts: 482 Member: 818297 Status: Offline Sonork: www.digantamobile Thanks Meter: 46	j100h dead no power dead boot repair ok but no power Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.49 (RIFFBOX2), JTAG Manager Version: 1.78 Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 2.81V, SD_CLK Frequency is 3.4 MHz Detected eMMC Chip, ID: 0x90/0x4A (H4G2b ), User Area Partition = 0x0000E9000000 Bytes (3.64 GB) Selected Resurrection Data for the eMMC Chip with Capacity = 3.64 GB Flashing the dead body...OK Resurrection complete!