Quote:
Originally Posted by Yusuf Lawal  please add full support for write firmware on v8.x.x in next update
Flash files count is :16
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.0
Scenario: [1]Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM21)
Boot mode: Preloader
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e36324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100464E36324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM25)
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x79000000 - LEN: 0x7000000
FORMAT EMMC FLASH : BEGIN: 0x80000000 - LEN: 0x150f80000
[1003]Error: S_INVALID_BBCHIP_TYPE
Wait untill phone will start charging. |
You must check your scatter, cpu from phone:MT6580 and cpu declared in scatter differ, posible your firmware is for other phone or you use wrong scatter.