GSM-Forum - View Single Post - Samsung SM-A510FD Reset FRP via UART EMMC 7 U5 patch done

profkefah · 06-11-2018, 14:56

Platform: Samsung Android
Selected port: COM15
Selected model: SM-A510FD
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM15
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM15
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Searching for UART interface.. COM15
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..unsuccessful
This version of "sBoot" is not supported, try to change "sBoot"!
Operation was failed!
Performed by 2.6.6 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM15
Selected model: SM-A510FD
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM15
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM15
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Searching for UART interface.. COM15
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.6 Software version.

06-11-2018, 14:56	#1 (permalink)
profkefah No Life Poster Join Date: Mar 2015 Location: Islam Age: 36 Posts: 7,425 Member: 2371500 Status: Offline Thanks Meter: 5,834	Samsung SM-A510FD Reset FRP via UART EMMC 7 U5 patch done Platform: Samsung Android Selected port: COM15 Selected model: SM-A510FD Operation: Reset FRP - UART EMMC Searching for UART interface.. COM15 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM15 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Searching for UART interface.. COM15 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock..unsuccessful This version of "sBoot" is not supported, try to change "sBoot"! Operation was failed! Performed by 2.6.6 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM15 Selected model: SM-A510FD Operation: Reset FRP - UART EMMC Searching for UART interface.. COM15 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM15 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Searching for UART interface.. COM15 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock..success FRP / Reactivation lock is successfully reseted! Performed by 2.6.6 Software version.