Action : Boot Info.
Selected 0-By CPU:MT6580
Exe version: NCKBox AndroidMTK 1.8.8.8
Will be used loader: DA_xxxxxxxxxxxxxxxx
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM96)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100464536324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM195)
-Reading GPT Drive OK
This phone have FRP partition.
Build ID: NRD90M
Display ID: alps-mp-n0.mp2-Vxxxxxxxxxxxxx
Version: 7.0
Build Date: Mon Aug 21 18:40:55 CST 2017
Mediatek Version Release: alps-mp-n0.mp2-Vxxxxxxxxxxxxxx
Region: ZA
Model: R3
Brand: Mobicel
Device: R3
IMEI[1]: 3xxxxxxxxxxxxxx
IMEI[2]: 3xxxxxxxxxxxxxx
Wait untill phone will start charging.
All done.
Will be used loader: DA_xxxxxxxxxxxxxxxxxxxxxxxxx
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM96)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100464536324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM195)
-Reading GPT Drive OK
Build ID: NRD90M
Display ID: alps-mp-n0.mp2-Vxxxxxxxxxxxxxxxx
Version: 7.0
Build Date: Mon Aug 21 18:40:55 CST 2017
Mediatek Version Release: alps-mp-n0.mp2-V1xxxxxxxxxxxx
Region: ZA
Model: R3
Brand: Mobicel
Device: R3
Manufacturer: Mobicel
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 3xxxxxxxxxxxxxx
IMEI[2] from NVRAM: 3xxxxxxxxxxxxxx
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xa800000 - LEN: 0xc0000000
Saved to : C:\Users\4g lte cellular\Documents\Android_MTK\firmware_backup\MT6 580_EMMC_Mobicel_R3_7_0_alps-mp-n0_mp2-V1xxxxxxxx_we_n_P1xx(2018_06_29_15_43)
Wait untill phone will start charging.
All done.
with special da
