GSM-Forum - View Single Post - Sigma Software v.2.28.03.01. P20 / P20 Pro / Honor 10 FRP Remove

Gsmserver · 07-05-2018, 11:49

Huawei P20 / P20 Pro / Honor 10 / Mate 10 FRP Remove

MANUAL: Remove FRP for Huawei P20 / Honor 10 / Mate 10

To install the drivers for required phone follow this link

Select "Android ADB" platform from the tab menu in the upper left side of the software
Go to "HiSilicon" tab
Turn the phone ON and connect it to PC with the USB cable
Select “Android ADB interface” port
Press “Remove FRP” button
The phone will ask to confirm RSA key fingerprint
If phone is not asking for RSA key fingerprint: Cancel the Remove FRP operation. Reboot the phone manually. Run the Remove FRP operation once again.
The message "Removing FRP… Done" indicates that procedure has been completed successfully
Disconnect the phone
Reboot the phone
Perform Master Reset from the phone menu

07-05-2018, 11:49	#2 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,149 Member: 21077 Status: Offline Thanks Meter: 116,345	Huawei P20 / P20 Pro / Honor 10 / Mate 10 FRP Remove MANUAL: Remove FRP for Huawei P20 / Honor 10 / Mate 10 To install the drivers for required phone follow this link Select "Android ADB" platform from the tab menu in the upper left side of the software Go to "HiSilicon" tab Turn the phone ON and connect it to PC with the USB cable Select “Android ADB interface” port Press “Remove FRP” button The phone will ask to confirm RSA key fingerprint If phone is not asking for RSA key fingerprint: Cancel the Remove FRP operation. Reboot the phone manually. Run the Remove FRP operation once again. The message "Removing FRP… Done" indicates that procedure has been completed successfully Disconnect the phone Reboot the phone Perform Master Reset from the phone menu Last edited by Gsmserver; 07-05-2018 at 11:55.