GSM-Forum - View Single Post

mushtaq4781 · 08-09-2018, 17:57

Z3X EasyJtag Software ver. 2.9.0.3
Skip loading eMMC Addon Firmware
CMD Pullup Level:1835 mV
CMD Active Level:1928 mV
Input file : C:\Users\SA COMMUNICATIN\Desktop\SONY_C5_E5553_emmc_direct_dum p_520MB\SONY_C5_E5553_emmc_direct_dump_520MB\EMMC_ ROM1_R311MB_805756471_00000000_20000000.bin
Writing 0020000000 bytes to 0000000000... ROM1 (USER ROM)
Error writing address 0x00000000 Error Code:-7 Reason

ATA SND Timeout Error
Retry writing address 0x0000000000 (Attempt #0)...
Retry failed at address 0x00000000 Error Code:-8 Reason

ATA SND CRC Error
Retry writing address 0x0000000000 (Attempt #0)...
Retry failed at address 0x00000000 Error Code:-7 Reason

ATA SND Timeout Error
Retry writing address 0x0000000000 (Attempt #0)...
Retry failed at address 0x00000000 Error Code:-4 Reason

ATA RCV CRC Error
Retry writing address 0x0000000000 (Attempt #0)...
Retry failed at address 0x00000000 Error Code:-4 Reason

ATA RCV CRC Error
Retry writing address 0x0000000000 (Attempt #0)...
Retry failed at address 0x00000000 Error Code:-7 Reason

ATA SND Timeout Error
Write Block Failed, Reason: DATA SND Timeout Error
Done.

Done with error(s)
Z3X EasyJtag Software ver. 2.9.0.3
Skip loading eMMC Addon Firmware
CMD Pullup Level:1835 mV
CMD Active Level:1938 mV
Can't init device, Reason: DATA RCV CRC Error
Done.

Z3X EasyJtag Software ver. 2.9.0.3
Skip loading eMMC Addon Firmware
CMD Pullup Level:1835 mV
CMD Active Level:1938 mV
Can't init device, Reason: DATA RCV CRC Error
Done.

08-09-2018, 17:57	#2 (permalink)
mushtaq4781 Junior Member Join Date: Mar 2014 Posts: 34 Member: 2155333 Status: Offline Thanks Meter: 2	Z3X EasyJtag Software ver. 2.9.0.3 Skip loading eMMC Addon Firmware CMD Pullup Level:1835 mV CMD Active Level:1928 mV Input file : C:\Users\SA COMMUNICATIN\Desktop\SONY_C5_E5553_emmc_direct_dum p_520MB\SONY_C5_E5553_emmc_direct_dump_520MB\EMMC_ ROM1_R311MB_805756471_00000000_20000000.bin Writing 0020000000 bytes to 0000000000... ROM1 (USER ROM) Error writing address 0x00000000 Error Code:-7 Reason ATA SND Timeout Error Retry writing address 0x0000000000 (Attempt #0)... Retry failed at address 0x00000000 Error Code:-8 Reason ATA SND CRC Error Retry writing address 0x0000000000 (Attempt #0)... Retry failed at address 0x00000000 Error Code:-7 Reason ATA SND Timeout Error Retry writing address 0x0000000000 (Attempt #0)... Retry failed at address 0x00000000 Error Code:-4 Reason ATA RCV CRC Error Retry writing address 0x0000000000 (Attempt #0)... Retry failed at address 0x00000000 Error Code:-4 Reason ATA RCV CRC Error Retry writing address 0x0000000000 (Attempt #0)... Retry failed at address 0x00000000 Error Code:-7 Reason ATA SND Timeout Error Write Block Failed, Reason: DATA SND Timeout Error Done. Done with error(s) Z3X EasyJtag Software ver. 2.9.0.3 Skip loading eMMC Addon Firmware CMD Pullup Level:1835 mV CMD Active Level:1938 mV Can't init device, Reason: DATA RCV CRC Error Done. Z3X EasyJtag Software ver. 2.9.0.3 Skip loading eMMC Addon Firmware CMD Pullup Level:1835 mV CMD Active Level:1938 mV Can't init device, Reason: DATA RCV CRC Error Done.