Code:
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM22)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (57Gb+4096Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 39:00:00:00:00:00:00:00
EMMC CID: 880103455041313030 : 00000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM7)
Build ID: LMY47I
Display ID: U925HA_V014En
Version: 5.1
Build Date: Tue Nov 22 22:10:31 CST 2016
Model: gxq6580_weg_l
Brand: alps
Device: gxq6580_weg_l
Manufacturer: alps
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 358193256734550
IMEI[2] from NVRAM: 358193256734568
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xa800000 - LEN: 0x4b000000
Saved to : E:\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_08_23_11_19)
Wait untill phone will start charging.
All done.