hello team
here log
Code:
Welcome to Medusa Pro Software version 1.7.0.
Started.
Reader #0: Generic EMV Smartcard Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : M250E
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_M250E_EMMC_BY_STARKRIMES.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 30785536
Size : 14.68 GB (15032.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A484147346132A432402E3DB471
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.4
Product serial number : (hex) 32402E3D
Manufacturing date : 11/2017
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7696384 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab800000 bytes
Device sector size : 512 bytes
Partition offset : 1179648
Number of sectors : 8126464
Device Manufacturer :lge
Device Platform :mt6750
Build ID :NRD90U
Display Build ID :NRD90U
Release ID :7.0
Device Model :LG-M250
Device Name :mlv5_global_com
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :mlv5_global_com-user 7.0 NRD90U 180112204be56 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_03_12_2018_10_48_01.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.0; FW: 1.24.
P00: GPT (00000000, 00000400) 512 KB
P01: proinfo (00000400, 00001800) 3072 KB
P02: spare1 (00001C00, 00002400) 4.5 MB
P03: misc2 (00004000, 00004000) 8 MB
P04: ftm (00008000, 00004000) 8 MB
P05: nvram (0000C000, 00002800) 5 MB
P06: spare2 (0000E800, 00001800) 3072 KB
P07: protect1 (00010000, 00004000) 8 MB
P08: protect2 (00014000, 00004000) 8 MB
P09: lk (00018000, 00000800) 1024 KB
P10: lk2 (00018800, 00000800) 1024 KB
P11: laf (00019000, 0000E000) 28 MB
P12: para (00027000, 00000400) 512 KB
P13: boot (00027400, 00008C00) 17.5 MB
P14: recovery (00030000, 00009800) 19 MB
P15: recoverybak (00039800, 00009800) 19 MB
P16: logo (00043000, 00004000) 8 MB
P17: lo_bak_go (00047000, 00004000) 8 MB
P18: expdb (0004B000, 00005000) 10 MB
P19: seccfg (00050000, 00004000) 8 MB
P20: oemkeystore (00054000, 00004000) 8 MB
P21: secro (00058000, 00003000) 6 MB
P22: spare3 (0005B000, 00001000) 2048 KB
P23: keystore (0005C000, 00004000) 8 MB
P24: tee1 (00060000, 00002800) 5 MB
P25: tee2 (00062800, 00002800) 5 MB
P26: eksst (00065000, 00000400) 512 KB
P27: encrypt (00065400, 00000400) 512 KB
P28: spare4 (00065800, 00002800) 5 MB
P29: persist_lg (00068000, 00004000) 8 MB
P30: mpt (0006C000, 0000B000) 22 MB
P31: lgfota (00077000, 00005000) 10 MB
P32: rct (0007C000, 00000800) 1024 KB
P33: factory (0007C800, 0001C000) 56 MB
P34: efuse (00098800, 00000400) 512 KB
P35: spare5 (00098C00, 00003400) 6.5 MB
P36: persist (0009C000, 00018000) 48 MB
P37: nvcfg (000B4000, 00004000) 8 MB
P38: nvdata (000B8000, 00010000) 32 MB
P39: metadata (000C8000, 00010000) 32 MB
P40: md1img (000D8000, 0000C000) 24 MB
P41: md1dsp (000E4000, 00002000) 4 MB
P42: md1arm7 (000E6000, 00001800) 3072 KB
P43: md3img (000E7800, 00002800) 5 MB
P44: cust (000EA000, 00032000) 100 MB
P45: frp (0011C000, 00004000) 8 MB
P46: system (00120000, 007C0000) 3968 MB
P47: cache (008E0000, 00100000) 512 MB
P48: OP (009E0000, 00038000) 112 MB
P49: userdata (00A18000, 0133BC00) 9.617 GB
P50: flashinfo (01D53C00, 00008000) 16 MB there is 2 type of emmc in this phone
first one
SAMSUNG EMMC QE13MB already in support eria
2end
Hynix eMMC HAG4a2
i tried Factory repair using this firmware
M250E10g_00_OPEN_AME_DS_OP_0427
phone still dead
Code:
Parsing file...
Opening H:/M250E10g_00_OPEN_AME_DS_OP_0427.kdz file...
File parsing finished.
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition preloader... Done.
Switched to user area.
Writing partition pgpt... Done.
Writing partition lk... Done.
Writing partition lk2... Done.
Writing partition laf... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition logo... Done.
Writing partition secro... Done.
Writing partition tee1... Done.
Writing partition tee2... Done.
Writing partition rct... Done.
Writing partition factory... Done.
Writing partition efuse... Done.
Writing partition md1img... Done.
Writing partition md1dsp... Done.
Writing partition md1arm7... Done.
Writing partition md3img... Done.
Writing partition cust... Done.
Writing partition sgpt... Done.
Switched to user area.
Writing partition OP_T... Done.
Writing is finished.
SW: 1.7.0; FW: 1.24.
#blue