Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM8)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) KSI 0x454838434538
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 700100454838434538 : 00000000000000
EMMC UA SIZE: 0x1c8000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1c8c00000 [7.137 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM30)
-Reading GPT Drive OK
Build ID: MRA58K
Display ID: W3LTE-H356D1-M-161216V55
Version: 6.0
Build Date: Fri Dec 16 21:00:21 CST 2016
Model: TECNO-W3LTE
Brand: TECNO
Device: TECNO-W3LTE
Manufacturer: TECNO
Mediatek Version Release: W3LTE-H356D1-M-161216V55
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 359605075901267
IMEI[2] from NVRAM: 359605075901275
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start processing trustzone
Start processing frp ......
Reading: BEGIN: 0x6a00000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x6b00000 - LEN: 0x2000000
Start processing system
Reading: BEGIN: 0xb000000 - LEN: 0xc0000000
Saved to : C:\Users\NASEER\Documents\Android_MTK\firmware_bac kup\MT6735M_EMMC_TECNO_TECNO-W3LTE_6_0_W3LTE-H356D1-M-161216V55(2018_04_07_07_14)
Wait untill phone will start charging.
All done.