| So It was my mistake, why ?
To repair your phone U need backup (first time readed from phone in Octoplus FRP program) and.
1. In phone do the reset procedure : (Vol - ,Vol+ , Power Button , together, tick 15sec) then put USB TYPE C , cable to phone and connect it to Windows.
Windows recognized :
Qualcomm HS-USB QDloader 9008 (if not , you must uninstall driver from Windows, and install correct drivers QualcommUSBDriver.zip)
2.In FRP Octoplus Program , tick for backup file and use the first (largest) file.
3.Chose correct COM PORT in Octoplus FRP program tab
4.USE RESET FRP (QUALCOMM 9008)
and do the reset procedure.
here is my log :
Welcome to Octoplus FRP Tool v.1.6.1.0
Platform: LG
Selected model: H870
Opening "LG_H870_22-01-2019_19-05-34.dump"...
Restore device from backup file?
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Connecting...
Reading info...
QC HW ID: 0005F0E100310000
QC CPU: Snapdragon 821 MSM8996AC Pro
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Checking request..
Reading partition...
Reading info...
Brand: lge
Model: LG-H870
Device: lucye
Platform: msm8996
Android version: 8.0.0
Display ID: OPR1.170623.032
Restoring BOOT...
Rebooting phone
Backup saved as LG_H870_01-02-2019_08-01-24.dump file
FRP lock is successfully reseted!
Performed by 1.6.1.0 Software version.
And now phone reset and work fine without google account .
Thank to the best Octoplus TEAM
Best regards
TelfonGSM |