View Single Post
Old 03-18-2019, 09:37   #21 (permalink)
Denozaur
No Life Poster
 
Join Date: Apr 2005
Age: 44
Posts: 681
Member: 136052
Status: Offline
Thanks Meter: 75
E:\Nokia TNS\Nokia 5.1
Error boot 1st Boot error !!!


BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
DA : SETUP EMI PARAMS FAILED!
ERROR : DA_EXCEED_MAX_NUM
Error : Fail to init protocol!

Reconnect Power/Cable!


Code:
Operation : Identify [ v1.10 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
 - > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage!

Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM4)
MODE : PRELOADER PORT
PORT : 4
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v1.10 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
 - > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage!

Waiting for device connection ...

PTFN : MTK USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : DSLevel  : DEV_KEY
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6755
AGENT : Nokia_All_InOne_DA_v03.2019.1303
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

     DA : SETUP EMI PARAMS FAILED!
  ERROR : DA_EXCEED_MAX_NUM

Error : Fail to init protocol!

Reconnect Power/Cable!

Operation : Identify [ v1.10 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
 - > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage!

Waiting for device connection ...

PTFN : MTK USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : DSLevel  : DEV_KEY
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6755
AGENT : Nokia_All_InOne_DA_v03.2019.1303
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

     DA : SETUP EMI PARAMS FAILED!
  ERROR : DA_EXCEED_MAX_NUM

Error : Fail to init protocol!

Reconnect Power/Cable!

Load : E:\Nokia TNS\Nokia 5.1\CO2-038E-0-00WW-B02_2.nb0
Load Ok!

Operation : Write FW [ v1.10 ]

Setting   : UserData preserve : False
Setting   : Bootloader update : True

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
 - > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage!

Waiting for device connection ...

PTFN : MTK USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : DSLevel  : DEV_KEY
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6755
AGENT : Nokia_All_InOne_DA_v03.2019.1303
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

     DA : SETUP EMI PARAMS FAILED!
  ERROR : DA_EXCEED_MAX_NUM

Error : Fail to init protocol!

Reconnect Power/Cable!
E:\Nokia TNS\3.1
Nokia 3.1 same EERROr to thise boot !

Code:
Operation : Identify [ v1.10 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
 - > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage!

Waiting for device connection ...

PTFN : MTK USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : DSLevel  : DEV_KEY
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6755
AGENT : Nokia_All_InOne_DA_v03.2019.1303
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

     DA : SETUP EMI PARAMS FAILED!
  ERROR : DA_EXCEED_MAX_NUM

Error : Fail to init protocol!

Reconnect Power/Cable!
  Reply With Quote
 
Page generated in 0.11180 seconds with 7 queries