| Y91c Not work
Exe version: NCKDongle AndroidMTK 2.5.9.9
Selected model: Vivo Y91C
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Keep VOL+ button untill inserting USB cable.
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM153)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6765 0 ca00
Using Algo 1.
Helio MT6765 phone detected, swithing to helio api
Loading Custom Preloader
Helio enabled DRAM in First Da: TRUE
BBCHIP MT6765
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051443633 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x749400000 [29.145 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM158)
Phone have OTP partition.
[3][Missing imei entry]Warning, nvram posible damaged!!.
Reading security, wait...
[0]Unlock is not supported for this model
[helio]Wait untill phone will start charging.
[0]All done. |