| samsung 5830 flash done
Welcome to Octoplus Box Samsung software version 2.7.9
-----------------------------------------------------------------------------------
To connect GT-S7562 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090# or *#0808#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect GT-S5830 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090# or *#0808#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
Selected firmware file: S5830IXXLA2_OXFKL4_MTL_Android_2.3.6.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-S5830 into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" +"Power"+''Home" keys.
Searching for a phone. Please wait...
Found phone on
Selected file is declared for GT-S5830I model!
File has been created for a different phone model.
Performed by 2.7.9 Software version.
Selected firmware file: S5830 LUX S5830XWKPO.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-S5830 into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" +"Power"+''Home" keys.
Searching for a phone. Please wait...
Found phone on
Firmware write started.
Writing mibib section...
mibib section has been written successfully.
Writing qcsbl section...
qcsbl section has been written successfully.
Writing oemsbl section...
oemsbl section has been written successfully.
Writing amss section...
amss section has been written successfully.
Writing arm11boot section...
arm11boot section has been written successfully.
Writing boot.img section...
boot.img section has been written successfully.
Writing recovery.img section...
recovery.img section has been written successfully.
Writing system.rfs section...
system.rfs section has been written successfully.
Writing data.rfs section...
data.rfs section has been written successfully.
Writing csc.rfs section...
csc.rfs section has been written successfully.
Please, restart the phone to apply changes
Firmware writing successfully completed.
Performed by 2.7.9 Software version. |