Welcome to Octoplus Box Samsung software version 2.7.9
-----------------------------------------------------------------------------------
To connect GT-N7000 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Press Home button.
9. Go to dial window.
10. Enter "*#9090# or *#0808#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-G920T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Reboot Download
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G920T
Firmware compiled date: Thu Mar 23 18:11:33 KST 2017
PDA version: G920TUVU5EQC2
CSC version: unknown
SW version: G920TUVS6FRA3
Phone SN: 00000000000
Android version: 6.0.1 (MMB29K)
Sales code: unknown
Country: unknown
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2017-03-01
Warranty Void: 1
SIM 1 status: absent
Codename: zerofltetmo
Rebooting phone in Download Mode...
Phone successfully rebooted in Download Mode.
Performed by 2.7.9.5 Software version.
Selected AP file: C:\Users\1\Downloads\twrp-3.3.0-0-zerofltetmo.img.tar
Please put the phone into Download Mode and connect USB cable.
To put SM-G920T into Download Mode, You have to perform the following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Reboot Recovery
Detected phone model: SM-G920T
Firmware compiled date: Thu Mar 23 18:11:33 KST 2017
PDA version: G920TUVU5EQC2
CSC version: unknown
SW version: G920TUVS6FRA3
Phone SN: 00000000000
Android version: 6.0.1 (MMB29K)
Sales code: unknown
Country: unknown
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2017-03-01
Warranty Void: 1
SIM 1 status: absent
Codename: zerofltetmo
Rebooting phone in Recovery mode...
Phone successfully rebooted in recovery mode.
Performed by 2.7.9.5 Software version.
Selected AP file: C:\Users\1\Desktop\rio\G920TUVS6FRC1_G920TTMB6FRC1 _G920TUVS6FRC1_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G920T into Download Mode, You have to perform the following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: DRK Fix
Proper android device not found. Make sure that "USB debug" option on the device is turned on.
DRK fixing failed!
Performed by 2.7.9.5 Software version.
Selected AP file: C:\Users\1\Downloads\twrp-3.3.0-0-zerofltetmo.img.tar
Please put the phone into Download Mode and connect USB cable.
To put SM-G920T into Download Mode, You have to perform the following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
To connect SHV-E250S phone you have to perform the following steps:
1. Go to dial window.
2. Enter "319712358" number.
3. Enter "996412" password.
4. Go to System->SIO mode.
5. Select "PDA" radio button for USB section.
6. Go to Qualcomm USB Settings.
7. Select "DM+Modem+ADB".
8. Restart phone.
9. Press "Read Info" in software.
Selected AP file: C:\Users\1\Desktop\rio\E250SKSUKOH4_E250SSKTKOH4_E 250SKSUKNI2_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SHV-E250S into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing TZSW section...
TZSW section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing Firmware Failed
Performed by 2.7.9.5 Software version.
Selected AP file: C:\Users\1\Desktop\rio\E250SKSUKOH4_E250SSKTKOH4_E 250SKSUKNI2_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SHV-E250S into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing TZSW section...
TZSW section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
To connect SM-G920T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Read info
Reading info, please wait...
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G920T
Firmware compiled date: Fri Mar 9 18:02:26 KST 2018
PDA version: G920TUVS6FRC1
CSC version: G920TTMB6FRC1
SW version: G920TUVS6FRC1
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: absent
Codename: zerofltetmo
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Read info
Reading info, please wait...
Detected phone model: SM-G920T
Firmware compiled date: Fri Mar 9 18:02:26 KST 2018
PDA version: G920TUVS6FRC1
CSC version: G920TTMB6FRC1
SW version: G920TUVS6FRC1
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: absent
Codename: zerofltetmo
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Repair Security
Detected phone model: SM-G920T
Firmware compiled date: Fri Mar 9 18:02:26 KST 2018
PDA version: G920TUVS6FRC1
CSC version: G920TTMB6FRC1
SW version: G920TUVS6FRC1
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: absent
Codename: zerofltetmo
Wiping EFS...
Phone will restart now. Please don't disconnect cable!
EFS wipe successfully
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Write Cert
Selected file: C:\Users\1\Desktop\cert-sm-g920t_359362060124295_r58g31hj5qm.cert
Detected phone model: SM-G920T
Firmware compiled date: Fri Mar 9 18:02:26 KST 2018
PDA version: G920TUVS6FRC1
CSC version: G920TTMB6FRC1
SW version: G920TUVS6FRC1
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: absent
Codename: zerofltetmo
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung\BACKUP\Security-SM-G920T-00000000000-26-04-2019_11-16-32-.asec file
Checking Certificate file...
Certificate file successfully checked
Initializing exploit...OK
Executing exploit...
Executing exploit failed
Initializing exploit...
Executing exploit...
Exploit has been executed successfully
Certificate has been written successfully
Please, restart the phone to apply changes
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Read info
Reading info, please wait...
Detected phone model: SM-G920T
Firmware compiled date: Fri Mar 9 18:02:26 KST 2018
PDA version: G920TUVS6FRC1
CSC version: G920TTMB6FRC1
SW version: G920TUVS6FRC1
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: network locked
Codename: zerofltetmo
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Unlock
Detected phone model: SM-G920T
Firmware compiled date: Fri Mar 9 18:02:26 KST 2018
PDA version: G920TUVS6FRC1
CSC version: G920TTMB6FRC1
SW version: G920TUVS6FRC1
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: network locked
Codename: zerofltetmo
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung\BACKUP\Security-SM-G920T-00000000000-26-04-2019_11-22-25-.asec file
Unlocking phone...
Initializing exploit...OK
Executing exploit...
Executing exploit failed
Initializing exploit...
Executing exploit...
Exploit has been executed successfully
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.7.9.5 Software version.
Quote:
Welcome to Octoplus Box Samsung software version 2.7.9
-----------------------------------------------------------------------------------
To connect GT-N7000 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Press Home button.
9. Go to dial window.
10. Enter "*#9090# or *#0808#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-G920T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Reboot Download
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G920T
Firmware compiled date: Thu Mar 23 18:11:33 KST 2017
PDA version: G920TUVU5EQC2
CSC version: unknown
SW version: G920TUVS6FRA3
Phone SN: 00000000000
Android version: 6.0.1 (MMB29K)
Sales code: unknown
Country: unknown
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2017-03-01
Warranty Void: 1
SIM 1 status: absent
Codename: zerofltetmo
Rebooting phone in Download Mode...
Phone successfully rebooted in Download Mode.
Performed by 2.7.9.5 Software version.
Selected AP file: C:\Users\1\Downloads\twrp-3.3.0-0-zerofltetmo.img.tar
Please put the phone into Download Mode and connect USB cable.
To put SM-G920T into Download Mode, You have to perform the following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Reboot Recovery
Detected phone model: SM-G920T
Firmware compiled date: Thu Mar 23 18:11:33 KST 2017
PDA version: G920TUVU5EQC2
CSC version: unknown
SW version: G920TUVS6FRA3
Phone SN: 00000000000
Android version: 6.0.1 (MMB29K)
Sales code: unknown
Country: unknown
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2017-03-01
Warranty Void: 1
SIM 1 status: absent
Codename: zerofltetmo
Rebooting phone in Recovery mode...
Phone successfully rebooted in recovery mode.
Performed by 2.7.9.5 Software version.
Selected AP file: C:\Users\1\Desktop\rio\G920TUVS6FRC1_G920TTMB6FRC1 _G920TUVS6FRC1_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G920T into Download Mode, You have to perform the following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: DRK Fix
Proper android device not found. Make sure that "USB debug" option on the device is turned on.
DRK fixing failed!
Performed by 2.7.9.5 Software version.
Selected AP file: C:\Users\1\Downloads\twrp-3.3.0-0-zerofltetmo.img.tar
Please put the phone into Download Mode and connect USB cable.
To put SM-G920T into Download Mode, You have to perform the following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
To connect SHV-E250S phone you have to perform the following steps:
1. Go to dial window.
2. Enter "319712358" number.
3. Enter "996412" password.
4. Go to System->SIO mode.
5. Select "PDA" radio button for USB section.
6. Go to Qualcomm USB Settings.
7. Select "DM+Modem+ADB".
8. Restart phone.
9. Press "Read Info" in software.
Selected AP file: C:\Users\1\Desktop\rio\E250SKSUKOH4_E250SSKTKOH4_E 250SKSUKNI2_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SHV-E250S into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing TZSW section...
TZSW section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing Firmware Failed
Performed by 2.7.9.5 Software version.
Selected AP file: C:\Users\1\Desktop\rio\E250SKSUKOH4_E250SSKTKOH4_E 250SKSUKNI2_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SHV-E250S into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing TZSW section...
TZSW section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
To connect SM-G920T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Read info
Reading info, please wait...
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G920T
Firmware compiled date: Fri Mar 9 18:02:26 KST 2018
PDA version: G920TUVS6FRC1
CSC version: G920TTMB6FRC1
SW version: G920TUVS6FRC1
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: absent
Codename: zerofltetmo
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Read info
Reading info, please wait...
Detected phone model: SM-G920T
Firmware compiled date: Fri Mar 9 18:02:26 KST 2018
PDA version: G920TUVS6FRC1
CSC version: G920TTMB6FRC1
SW version: G920TUVS6FRC1
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: absent
Codename: zerofltetmo
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Repair Security
Detected phone model: SM-G920T
Firmware compiled date: Fri Mar 9 18:02:26 KST 2018
PDA version: G920TUVS6FRC1
CSC version: G920TTMB6FRC1
SW version: G920TUVS6FRC1
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: absent
Codename: zerofltetmo
Wiping EFS...
Phone will restart now. Please don't disconnect cable!
EFS wipe successfully
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Write Cert
Selected file: C:\Users\1\Desktop\cert-sm-g920t_359362060124295_r58g31hj5qm.cert
Detected phone model: SM-G920T
Firmware compiled date: Fri Mar 9 18:02:26 KST 2018
PDA version: G920TUVS6FRC1
CSC version: G920TTMB6FRC1
SW version: G920TUVS6FRC1
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: absent
Codename: zerofltetmo
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung\BACKUP\Security-SM-G920T-00000000000-26-04-2019_11-16-32-.asec file
Checking Certificate file...
Certificate file successfully checked
Initializing exploit...OK
Executing exploit...
Executing exploit failed
Initializing exploit...
Executing exploit...
Exploit has been executed successfully
Certificate has been written successfully
Please, restart the phone to apply changes
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Read info
Reading info, please wait...
Detected phone model: SM-G920T
Firmware compiled date: Fri Mar 9 18:02:26 KST 2018
PDA version: G920TUVS6FRC1
CSC version: G920TTMB6FRC1
SW version: G920TUVS6FRC1
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: network locked
Codename: zerofltetmo
Performed by 2.7.9.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G920T
Operation: Unlock
Detected phone model: SM-G920T
Firmware compiled date: Fri Mar 9 18:02:26 KST 2018
PDA version: G920TUVS6FRC1
CSC version: G920TTMB6FRC1
SW version: G920TUVS6FRC1
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: network locked
Codename: zerofltetmo
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung\BACKUP\Security-SM-G920T-00000000000-26-04-2019_11-22-25-.asec file
Unlocking phone...
Initializing exploit...OK
Executing exploit...
Executing exploit failed
Initializing exploit...
Executing exploit...
Exploit has been executed successfully
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.7.9.5 Software version.
|