Quote:
Originally Posted by JayDi  Read it : Code: Operation : Read Flash [ v1.05 ]
1. Power off device, remove battery
2. Press and hold "0" and "#" buttons
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD SECURE BOOT Block version
BootSource : InternalLibrary
BootVersion : Infinity SC770x SECLDR
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
Reading SW version info...
SWV : 11.0.0.17.02
PRC : 059Z3N5
IMEI : xxxxxxxxxxxxxx
Reading flash ...
Read finished!
Processing ...
DSP0
DSP1
KERNEL
USER
MMI
Verify signatures ...
KERNEL
USER
Processing NVRM ...
Build firmware ...
Build done!
Saved to : D:\Backup\3310\Nokia_11.0.0.17.02_059Z3N5.pac.sc
Done!
Elapsed: 00:03:18
Reconnect Power/Cable! Flash it : Code: Operation : Write Flash [ v1.05 ]
1. Power off device, remove battery
2. Press and hold "0" and "#" buttons
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD SECURE BOOT Block version
BootSource : InternalLibrary
BootVersion : Infinity SC770x SECLDR
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
Load : Nokia_11.0.0.17.02_059Z3N5.pac.sc
Flash : bootloader
Flash : dsp0
Flash : dsp1
Flash : kernel_exec
Flash : user_exec
Flash : mmi_res
Flash : nvitems
Erase : preload
Flash : preload
Erase : xfile
Erase : autosms
Erase : flash
Done!
Elapsed: 00:02:07
Reconnect Power/Cable! SP unlock,
Repair security,
Format FS
also, seems, as working. On way forensic and rest.
2G will follow also  |
so this post is all about read and write only?