| Plus One Japan Limited FTU18A00 ROOT DONE
Operation : Root Device
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM685)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8909_012]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Plus One Japan Limited FTU18A00 [msm8909]
Software : FREETEL_FTU18A00_0309_20180629, 1019 [Fri Jul 27 19:49:02 CST 2018]
Android Ver. : 7.1.2
Patch Level : 2018-06-01
Reading Data from Device...Done
Saving Backup...Done
Backup : C:\UMTool\QcFire\Read\Plus One Japan Limited_FTU18A00_FREETEL_FTU18A00_0309_20180629_20 18-06-01_190523_075932\boot_org.qri
Preparing Data...Done
Injecting Root Script...Done
Patching Kernel...Done
Repacking Image...Done
Saving Root Image...Done
Root Image : C:\UMTool\QcFire\Read\Plus One Japan Limited_FTU18A00_FREETEL_FTU18A00_0309_20180629_20 18-06-01_190523_075932\boot.qri
Writing Root Image...Done
If phone hang on logo, or boot loop, just write boot_org.qri using [Flash QRI]
Operation Finished.
QcFire Ver. 4.1 |