Anyone has this firmware?
KEYTAK60A_M216_PCB01_gprs_MT6260_S00.M216_7789VN_K F1_181116_V03.bin Code:
Operation : Check / Read Info [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 6 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E753760E906F3E18848A388CBCEEA7D0
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : EF00 6000 1800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x00FFE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
File_Info : KEYTAK60A_M216_PCB01_gprs_MT6260_S00.M216_7789VN_KF1_181116_V03.bin
FileVersion : M216_7789VN_KF1_181116_V03
Done!
Elapsed: 00:00:10