View Single Post
Old 10-22-2019, 04:46   #1 (permalink)
basitnazeer
Freak Poster
 
Join Date: Feb 2018
Location: bahawalpur
Posts: 155
Member: 2809413
Status: Offline
Sonork: CharlesMaind
Thanks Meter: 26
Donate money to this user
calme c700 flash file 100% tested file

Code:
CALME-C700 SPD6531E 100% Tested File Downloads Free By modernmobile42
Operation : Identify [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Read UserCode [ v1.04 ]

MODE : From Device
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Reading data ... 
Sorting data ... 
STATE : NOT ACTIVE : CODE : 0000

Done!
Elapsed: 00:00:33

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Format FileSystem [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_087955F65868_NVM.nv

Executing FormatFFS ... 
Format FFS Done!

Done!
Elapsed: 00:00:30

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Read Flash [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok, 4194304 bytes

Saved to : C:\Users\BASIT NAZZEER\Desktop\SC6531_SPI_WINBOND_W25Q_4MiB.bin

Done!
Elapsed: 00:01:12

Reconnect Power/Cable!

All Flash File Downloads Free 
Password:modernmobile42.com 

Downloads Firmware Free Pleaze Feedback by Comments.
Download
  Reply With Quote
 
Page generated in 0.08925 seconds with 7 queries