Quote:
Originally Posted by Jeka-777  i wrote QCN, network divisions appeared
But there is no network 
Then i tap *#0011# and see that: 
if i tap *#06#, - imei is ok!
Then i try to Unlock network again ((( But so many errors (( 
LOG: Code: hecking Login and Password... OK
Ballance: 17 crd.
You have 17 credit(s) left. This operation takes 8 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G935T
Android version: 8.0.0
PDA version: G935TUVS9CSC1
CSC version: G935TTMB9CSC1
Phone version: G935TUVS9CSC1
Product code: SM-G935TZKATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: RF8H42PTZRT
IMEI: 357219072100477
HW version: REV0.7
RF cal date: 2016.05.02
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2019-03-01
Boot Warranty bit: 0
SIM State: READY
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM35 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.10.0)
Retry 1...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.10.0)
Retry 2...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.10.0)
Retry 3...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.10.0)
Retry 4...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.10.0)
Retry 5...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.10.0)
Retry 6...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.10.0)
Retry 7...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.10.0)
Retry 8...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.10.0)
Retry 9...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.10.0)
Retry 10...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.10.0)
Done with Samsung Tool PRO v.38.2 plz help (( so many credits left, but no result (( |
The problem from the photo of the service mode that you posted is evident in some failures imei certi fail, it means that cert and imei is damaged, even if you wrote that from the phone's keypad * # 06 #, - imei is ok! and appears the imei is damaged, to repair the cert and imei via box is impossible having the g930t the qualcomm processor is not supported, you can only write imei original rooting the phone, but if you do not have a backup of the cert and imei original, you can not do nothing, the only way is to get it done remotely for a fee by changing imei.
By writing the qcn to g935t you repaired the mipi but damaged the cert and imei, but the problem is upstream, before unblocking the network with z3x via credit server, was the mipi in place or damaged?
I think the mipi was in place before I unblocked the network with z3x because otherwise the unlocking operation in my opinion gave an error and failed and was damaged after you unlocked the phone, you are not the only one who is success this there are many posts on forums in various sections of the forum that had this problem.