[galaxycompue]

lyder sir i'm very confused abput rpmb partition, i here giving log of redmi 4x (santoni firmware), when i doing software via usb cable it give error in last not i'm giving log here rpmb area is not clean(set is stop hang on logo) what i can do with jtag in this case can we recover this handset ?

eMMC_tool Suite ver. 1.6.2.0 (release date: 30.06.2019)
Microsoft Windows 7 (32 bit) build 7601 (6.1.7600.16385)

Looking for EasyJTAG box...
EasyJTAG API ver. 3307
EasyJTAG Box Serial = DF206405518F2085
Card Serial = AAC5E063
EasyJTAG Box Firmware = 2.48

Changelog:

30.06.2019 (ver 1.6.1.0)
Fix: Bugs that have been found through your crash report

Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 14 MHz
EMMC Device Information :
EMMC CID: 13014E51334A39375610048D5A8B2487
EMMC CSD: D07F01328F5913FFFFFFFFEF9240009F
EMMC Manufacture : MICRON , EMMC NAME: Q3J97V , HEX: 51334A393756 , S/N: 048D5A8B , rev. 0x10
EMMC Manufacture ID: 0x13 , OEM ID: 0x4E , Device Type: BGA (Discrete embedded) , Date: 2/2017
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 29231 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: Q3J97V_048D5A8B_20191214_132759.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: modem, [000004000000 - 000009400000], size: 000005400000 (84.0 MB)
Partition: fsc, [00000C000000 - 00000C000400], size: 000000000400 (1.00 KB)
Partition: ssd, [00000C000400 - 00000C002400], size: 000000002000 (8.00 KB)
Partition: sbl1, [00000C002400 - 00000C082400], size: 000000080000 (512. KB)
Partition: sbl1bak, [00000C082400 - 00000C102400], size: 000000080000 (512. KB)
Partition: rpm, [00000C102400 - 00000C182400], size: 000000080000 (512. KB)
Partition: rpmbak, [00000C182400 - 00000C202400], size: 000000080000 (512. KB)
Partition: tz, [00000C202400 - 00000C402400], size: 000000200000 (2.00 MB)
Partition: tzbak, [00000C402400 - 00000C602400], size: 000000200000 (2.00 MB)
Partition: devcfg, [00000C602400 - 00000C642400], size: 000000040000 (256. KB)
Partition: devcfgbak, [00000C642400 - 00000C682400], size: 000000040000 (256. KB)
Partition: dsp, [00000C682400 - 00000D682400], size: 000001000000 (16.0 MB)
Partition: modemst1, [00000D682400 - 00000D802400], size: 000000180000 (1.50 MB)
Partition: modemst2, [00000D802400 - 00000D982400], size: 000000180000 (1.50 MB)
Partition: DDR, [000010000000 - 000010008000], size: 000000008000 (32.0 KB)
Partition: fsg, [000010008000 - 000010188000], size: 000000180000 (1.50 MB)
Partition: sec, [000010188000 - 00001018C000], size: 000000004000 (16.0 KB)
Partition: splash, [000014000000 - 000015400000], size: 000001400000 (20.0 MB)
Partition: aboot, [000018000000 - 000018100000], size: 000000100000 (1.00 MB)
Partition: abootbak, [000018100000 - 000018200000], size: 000000100000 (1.00 MB)
Partition: boot, [000018200000 - 00001C200000], size: 000004000000 (64.0 MB)
Partition: recovery, [00001C200000 - 000020200000], size: 000004000000 (64.0 MB)
Partition: devinfo, [000020200000 - 000020300000], size: 000000100000 (1.00 MB)
Partition: system, [000020300000 - 0000E0300000], size: 0000C0000000 (3.00 GB)
Partition: cache, [0000E4000000 - 0000F4000000], size: 000010000000 (256. MB)
Partition: persist, [0000F4000000 - 0000F6000000], size: 000002000000 (32.0 MB)
Partition: misc, [0000F6000000 - 0000F6100000], size: 000000100000 (1.00 MB)
Partition: keystore, [0000F6100000 - 0000F6180000], size: 000000080000 (512. KB)
Partition: config, [0000F6180000 - 0000F6188000], size: 000000008000 (32.0 KB)
Partition: oem, [0000F6188000 - 0000FA188000], size: 000004000000 (64.0 MB)
Partition: limits, [0000FC000000 - 0000FC008000], size: 000000008000 (32.0 KB)
Partition: mota, [000100000000 - 000100080000], size: 000000080000 (512. KB)
Partition: dip, [000100080000 - 000100180000], size: 000000100000 (1.00 MB)
Partition: mdtp, [000100180000 - 000102180000], size: 000002000000 (32.0 MB)
Partition: syscfg, [000102180000 - 000102200000], size: 000000080000 (512. KB)
Partition: mcfg, [000102200000 - 000102600000], size: 000000400000 (4.00 MB)
Partition: lksecapp, [000104000000 - 000104020000], size: 000000020000 (128. KB)
Partition: lksecappbak, [000104020000 - 000104040000], size: 000000020000 (128. KB)
Partition: cmnlib, [000104040000 - 000104080000], size: 000000040000 (256. KB)
Partition: cmnlibbak, [000104080000 - 0001040C0000], size: 000000040000 (256. KB)
Partition: cmnlib64, [0001040C0000 - 000104100000], size: 000000040000 (256. KB)
Partition: cmnlib64bak, [000104100000 - 000104140000], size: 000000040000 (256. KB)
Partition: keymaster, [000104140000 - 000104180000], size: 000000040000 (256. KB)
Partition: keymasterbak, [000104180000 - 0001041C0000], size: 000000040000 (256. KB)
Partition: apdp, [000108000000 - 000108040000], size: 000000040000 (256. KB)
Partition: msadp, [000108040000 - 000108080000], size: 000000040000 (256. KB)
Partition: dpo, [000108080000 - 000108082000], size: 000000002000 (8.00 KB)
Partition: cust, [000108082000 - 000128082000], size: 000020000000 (512. MB)
Partition: userdata, [000128082000 - 000747BFBE00], size: 00061FB79E00 (24.5 GB)
GPT header successfully parsed

Get firmware version

Brand = Xiaomi
Manufacturer = Xiaomi
Device = santoni
Model = Redmi 4X
Phone platform = msm8937
CPU Abi = arm64-v8a
Android release = 7.1.2
Firmware version = N2G47H
Miui Version = V10.3.1.0.NAMMIXM
Firmware date = Thu Apr 11 20:05:35 WIB 2019

Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 14 MHz
EMMC Device Information :
EMMC CID: 13014E51334A39375610048D5A8B2487
EMMC CSD: D07F01328F5913FFFFFFFFEF9240009F
EMMC Manufacture : MICRON , EMMC NAME: Q3J97V , HEX: 51334A393756 , S/N: 048D5A8B , rev. 0x10
EMMC Manufacture ID: 0x13 , OEM ID: 0x4E , Device Type: BGA (Discrete embedded) , Date: 2/2017
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 29231 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: Q3J97V_048D5A8B_20191214_132812.extcsd
EMMC Init completed.

Operation: Reading S.M.A.R.T Report ...

Device Life Time Estimation (MLC) [269]: 0x01 0% - 10% device life time used
Device Life Time Estimation (SLC) [268]: 0x02 10% - 20% device life time used
Pre EOL information [267]: 0x01 Normal

Optimal Read Size [266]: 0x01 4 KB
Optimal Write Size [265]: 0x06 24 KB
Optimal Trim Unit Size [264]: 0x01 4 KB