View Single Post
Old 01-02-2020, 18:34   #61865 (permalink)
profkefah
No Life Poster
 
profkefah's Avatar
 
Join Date: Mar 2015
Location: Islam
Age: 36
Posts: 7,404
Member: 2371500
Status: Offline
Thanks Meter: 5,810
spd Sc7731c samsung s8 clone READING FIRMWARE AND NV DONE

ASSALMU ALAYKOM


READING FIRMWARE
Code:
Operation : Read fw [ v2.03 ]

1. Power off device, wait 10-15 seconds
2. Press and hold bookey ( 1 : Both vol , 2 : Vol+ , 3 : Vol- )
3. Insert cable in device!

Wait for device ...

Device connected!
Bootversion : Sprd3
boot : Inf : 0_sc7731x_base : Sc7731c_emmc_512mb_ns
sending init boot ...
Boot sent!
Kick fdl ...
Bootversion : Spreadtrum boot block version 1.1
protocol setup ...
Port speed : 921600
sending flash boot ...
Boot sent!
Kick flash fdl ...
Protoex : : Trcc not supported!
Fdl : Control transfered!

Boot done!

Device info :
Patch level : Mra58k
display id : Mra58k release-keys
ver. Codename : Rel
ver. Release : 6.0
sec. Patch : 2016-05-01
build time : 1493868446
product model : S8 mini
product brand : S8mini
product name : S8mini
product device : S8mini
product board : Sp7731ceb
product manfct : S8mini
board platform : Sc8830
product info : Sp7731c_1h10_32v4

vlnrlevel : 0x01

sc8830__s8mini__s8_mini__6.0__mra58k__sp7731c_1h10 _32v4

read : Prodnv.img
extsparse : Compression ratio : 22%
read : Phase.cfg
read : Wmodem.bin
read : Wdsp.bin
read : Wnvitem.bin
read : Modem_wcn.img
read : Wcnnvitem.bin
read : Boot_logo.bmp
read : Boot.img
read : System.img
extsparse : Compression ratio : 88%
make : Persist.img
make : Cache.img
read : Recovery.img
read : Sysinfo.bin
extsparse : Compression ratio : 4%
make : Userdata.img
read : U-boot.bin
read : U-boot-spl.bin

firmware size : 0x5d741918 ( 1.46 gib )
android info saved : _android_info.txt
reconnect power/cable!


Done!
Elapsed: 01:22:14


NV READING DONE
Code:






operation : Read nvm [ v2.03 ]
bootmode : Flash

1. Power off device, wait 10-15 seconds
2. Press and hold bookey ( 1 : Both vol , 2 : Vol+ , 3 : Vol- )
3. Insert cable in device!

Wait for device ... 

Device connected!
Bootversion : Sprd3
boot : Inf : 0_sc7731x_base : Sc7731c_emmc_512mb_ns
sending init boot ... 
Boot sent!
Kick fdl ... 
Bootversion : Spreadtrum boot block version 1.1
protocol setup ... 
Port speed : 921600
sending flash boot ... 
Boot sent!
Kick flash fdl ... 
Protoex :  : Trcc not supported!
Fdl : Control transfered!

Boot done!

Nvmng  : Securityinfo 
imei[1] : 357365045492143
imei[2] : 357365045492150
imei[3] : 358570010103893
wifimac : Ffffffffffff
bt_mac  : Ffffffffffff
nvmng  : Backup ok , 0x00031f10

nvmng  : Securityinfo 
imei[1] : 352273017386340
imei[2] : 352751019523267
imei[3] : 358570010103893
wifimac : Ffffffffffff
bt_mac  : Ffffffffffff
nvmng  : Backup ok , 0x00000a1c

platform version: Mocortm_14b_7731c_w16.xx.x_debug
project version:   Sc7731c_cp0_modem
base  version:    Tm_base_w16.xx.x
mmi version:       Sc7731c_modem
hw version:        Sc7731c_cp0_modem
cmp_time : 07-04-2016 13:28:58

modem tag : Mocortm_14b_7731c_w16.xx.x_debug_tm_base_w16.xx.x_sc7731c_cp0_modem_sc7731c_cp0_modem_sc7731c_modem

reconnect power/cable!


Done!
Elapsed: 00:02:03

Last edited by profkefah; 01-02-2020 at 18:43.
  Reply With Quote
The Following 2 Users Say Thank You to profkefah For This Useful Post:
 
Page generated in 0.09028 seconds with 7 queries