Operation : Identify [ v2.04 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : MRA58K
Display ID : LYF-F211S-000-02-14-130619
Ver. Incmt : LYF-F211S-000-02-14-130619
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-07-01
Build Time : 1560422652
Product Model : F211S
Product Brand : LYF
Product Name : sd208_cww_221
Product Device : sd208_cww_221
Product Board : sd208_cww_221
Product Manfct : Skyworth
Board Platform : sp9820e
Product Info : sd208_cww_221
Product Model : F211S
Update DataBase ...
SecInfo :
IMEI[1] : 911xxxxxxxxxx32
IMEI[2] : 86xxxxxxxxxxx20
IMEI[3] : 86xxxxxxxxxxx38
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SIMLOCK : SignedType
UserData : STATE : PLAIN
Done!
Elapsed: 00:01:18
Operation : Read NVM [ v2.04 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
NVMng : SecurityInfo
IMEI[1] : 911xxxxxxxxxx32
IMEI[2] : 86xxxxxxxxxxx20
IMEI[3] : 86xxxxxxxxxxx38
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SIMLOCK : SignedType
NVMng : Backup Ok , 0x000C61C4
Reconnect Power/Cable!
Done!
Elapsed: 00:00:31
NOTE : AFTER READ FULL INFO CLOSE TOOL AND REOPEN AND WILL GET YOUR MODEL IN LIST SELECT AND READ BRUSH BAG SUCCESSFULLY(HINT IF GET ERROR PRESS SHIFT KEY TO READ BRUSH BAG)
Operation : Read FW [ v2.04 ]
Extra : Ignore CriticalPart Verify : Enabled
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F211S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : MRA58K
Display ID : LYF-F211S-000-02-14-130619
Ver. Incmt : LYF-F211S-000-02-14-130619
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-07-01
Build Time : 1560422652
Product Model : F211S
Product Brand : LYF
Product Name : sd208_cww_221
Product Device : sd208_cww_221
Product Board : sd208_cww_221
Product Manfct : Skyworth
Board Platform : sp9820e
Product Info : sd208_cww_221
Product Model : F211S
AndroidVer : 6
VlnrLevel : 0x02
SP9820E__Skyworth__F211S__6.0__LYF-F211S-000-02-14-130619__MRA58K__sd208_cww_221
Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : modem_l.bin
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : system.img
ExtSparse : Compression ratio : 32%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 16%
Make : udisk.img
Read : deltanv_l.bin
Read : phase.cfg
Read : u-boot-spl.bin
Firmware size : 0x17CC5408 ( 380.77 MiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:27:53