 Huawei Dra-lx5 not connect octoplus huawei tool [Solved]
Sir i am try many time but same driver is ok i try to uninstall and install but no connect plz sir solve my problem...
Welcome to Octoplus Huawei Software v.1.1.5
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM1 Communications Port
2: COM6 USB Serial Port
2020-02-26 08:26:08 GMT -------------------------------------------------
Starting Connect
Selected phone model: DRA-LX5
Please Power off the phone, Press 'Vol-' and insert USB cable
Error: Auto Boot Flash Tool
Try to "Power ON" / "Power OFF" device and perform operation again
Connect failed.
Performed by 1.1.5 Software version. |