GSM-Forum - View Single Post - Post here succesfull JTAG and eMMC operations with Easy-Jtag:

.::THE ROCK::. · 03-07-2020, 11:38

OPPO A1K CPH1923

PATTERN UNLOCK

EASY JTAG

INFO OR UNLOCK LOG

Code:

Z3X EasyJtag Software ver. 3.6.2.3
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 0707031F7AA05FBD, ,FW Ver.: 01.63
CMD Pullup Level:2052 mV
CMD Active Level:2970 mV
Box IO Level:3300 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------

eMMC CID : 150100514436334D4203781EDE2FC592
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 12/2018  Rev.0x3
eMMC NAME: QD63MB , S/N: 2015288879
eMMC NAME (HEX): 514436334D42 
EMMC ROM1 (Main User Data)   Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 4441 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
  Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x02 , width 8bits  , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
 Device support partitioning feature
 Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: QD63MB_2015288879_20200307_1514.extcsd
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 3A3E000 sectors 29.1 GiB 
Soft (Partitioned) Disk/Image size: 3A3DFBC sectors 29.1 GiB 
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200  bytes ,First/Last usable sector: 34,61071326
Partition info successfully found
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x0074800000 (4.687GB)
Short EXT fs info:
Size: 4.613GB
Block size: 4.0KB
Inode size: 256
Inodes: 302512
Short Android info:
Unable to read prop.plist , code : 2
Backup saved: BuildProp_20200307_1514.txt
---------------------------------------------
Detected USERDATA USERDATA : 0x01BB800000 (22.132GB)
Unable to mount USERDATA , code : 95
Userdata Superblock contents::
 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000     ................................;
 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000     ................................;
 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000     ................................;
 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000     ................................;
 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000     ................................;
 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000     ................................;
 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000     ................................;
 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000     ................................;
Done.

Running:Format FRP Partition...
Z3X EasyJtag Software ver. 3.6.2.3
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 0707031F7AA05FBD, ,FW Ver.: 01.63
CMD Pullup Level:2041 mV
CMD Active Level:3021 mV
Box IO Level:3300 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------

eMMC CID : 150100514436334D4203781EDE2FC592
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 12/2018  Rev.0x3
eMMC NAME: QD63MB , S/N: 2015288879
eMMC NAME (HEX): 514436334D42 
EMMC ROM1 (Main User Data)   Capacity: 29820 MB , 0x3A3E000 pages , 0x747C00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 4441 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
  Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x02 , width 8bits  , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
 Device support partitioning feature
 Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 3A3E000 sectors 29.1 GiB 
Soft (Partitioned) Disk/Image size: 3A3DFBC sectors 29.1 GiB 
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200  bytes ,First/Last usable sector: 34,61071326
Partition info successfully found
Formatting FRP...
Detected LINUX(Android) FRP : 0x000BE88000 (1.0MB) formatting...
Done.
Detected LINUX(Android) CACHE : 0x01A0800000 (432.0MB) , formatting...
Done.
Detected LINUX(Android) USERDATA : 0x01BB800000 (22.132GB) , formatting...
Done.
Done.
Done.