| Qmobile Lt200 8.1 flashing sucsess
Operation : Flash Firmware [ v2.05 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9850x_BASE : SC9850_eMMC_2GB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 460800
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
PMTMng : Skip update! Reason : untested chain!
UBOOT : u-boot.bin
UBOOT : u-boot.bin
CODE : sml.bin
CODE : sml.bin
CODE : tos.bin
CODE : tos.bin
CODE : vbmeta.img
CODE : vbmeta.img
CODE : ldsp_l.bin
CODE : gdsp_l.bin
CODE : modem_l.bin
CODE : deltanv_l.bin
CODE : pm_sys.bin
CODE : modem_wcn.img
CODE : boot.img
CODE : recovery.img
FSIMG : persist.img
CODE : boot_logo.bmp
CODE : fastboot_logo.bmp
FSIMG : system.img
FSIMG : vendor.img
FSIMG : userdata.img
FSIMG : cache.img
FSIMG : prodnv.img
UBOOT : u-boot-spl.bin
ERASE : MISC
ERASE : UBOOT_LOG
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:05:58
Last edited by bilal khan12345; 05-14-2020 at 11:59.
|