huawel Y6 2019 successfull unlock done.
Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MTK USB Port (COM2)) (Driver version: 2.0.0.1)
Preparing to start flash mode;
Preparing to open COM2
Connecting;
Downloading DA;
Initializing;
Rid: db38169479f38017681c92be4c7b2b83
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
BB ID: RDJDQjQ1MDU1QUIyRDQ5MzAwMDAwMDAwMDAwMDAwMDA=
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0x2EE20142 0xBDB676F2 [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xEE000000 SIZE: 0x659A00000
SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder
Searching data;
Phone unlocked; Remove battery and cable;
Time needed - 00:00:01 |