Code:
Welcome to Medusa Pro Software version 2.0.9. Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: Alcor Micro USB Smart Card Reader 2
Loading firmware. Please wait... Done.
Selected eMMC interface.
Selected PIN - CONNECTOR socket.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : 50 MHz
Connecting...
Device : Samsung eMMC QE13MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100514531334D420DA8A268671415
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE13MB
Product revision : 0.13
Product serial number : (hex) A8A26867
Manufacturing date : 01/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 884736
Number of sectors : 6176768
Device Manufacturer : lge
Device Platform : mt6753
Build ID : MRA58K
Display Build ID : MRA58K
Release ID : 6.0
Device Model : LG-K430
Device Name : m253_global_com
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : m253_global_com-user 6.0 MRA58K 1708319266d90 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QE13MB_25_05_2020_07_06_58.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.0.9; FW: 2.00.
P00: GPT (00000000, 00000400) 512 KB
P01: proinfo (00000400, 00001800) 3072 KB
P02: misc2 (00001C00, 00004000) 8 MB
P03: ftm (00005C00, 00004000) 8 MB
P04: nvram (00009C00, 00002800) 5 MB
P05: protect1 (0000C400, 00005000) 10 MB
P06: protect2 (00011400, 00005000) 10 MB
P07: lk (00016400, 00001000) 2048 KB
P08: lkbak (00017400, 00001000) 2048 KB
P09: laf (00018400, 0000E000) 28 MB
P10: para (00026400, 00000400) 512 KB
P11: boot (00026800, 00008000) 16 MB
P12: recovery (0002E800, 00008000) 16 MB
P13: recoverybak (00036800, 00008000) 16 MB
P14: logo (0003E800, 00004000) 8 MB
P15: lo_bak_go (00042800, 00004000) 8 MB
P16: expdb (00046800, 00005000) 10 MB
P17: seccfg (0004B800, 00000400) 512 KB
P18: oemkeystore (0004BC00, 00001000) 2048 KB
P19: secro (0004CC00, 00003000) 6 MB
P20: keystore (0004FC00, 00004000) 8 MB
P21: tee1 (00053C00, 00002800) 5 MB
P22: tee2 (00056400, 00002800) 5 MB
P23: eksst (00058C00, 00000400) 512 KB
P24: encrypt (00059000, 00000400) 512 KB
P25: persist_lg (00059400, 00004000) 8 MB
P26: mpt (0005D400, 0000B000) 22 MB
P27: persistent (00068400, 00001000) 2048 KB
P28: lgfota (00069400, 00005000) 10 MB
P29: cust (0006E400, 00032000) 100 MB
P30: rct (000A0400, 00000800) 1024 KB
P31: factory (000A0C00, 0000E000) 28 MB
P32: persist (000AEC00, 00018000) 48 MB
P33: efuse (000C6C00, 00000400) 512 KB
P34: frp (000C7000, 00000800) 1024 KB
P35: nvdata (000C7800, 00010800) 33 MB
P36: system (000D8000, 005E4000) 3016 MB
P37: cache (006BC000, 00064000) 200 MB
P38: OP (00720000, 00008000) 16 MB
P39: userdata (00728000, 015EEC00) 10.97 GB
P40: flashinfo (01D16C00, 00008000) 16 MB
Backuping nvdata partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QE13MB_nvdata_0xc7800_0x10800_25_05_2020_07_06_58.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:05
SW: 2.0.9; FW: 2.00.
RPMB: Authentication Key not yet programmed.