 HUAWEI Y6 Prime 2019 FRP lock is successfully reseted!
Platform: HUAWEI
Selected model: MRD-LX1F
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM49
Port name: MediaTek USB Port (COM49)
Detecting Chip Version...
HW Chip: MT6761: 0717.0000
HW Version: 8A00.CA01.0200.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Sending Auth Data...
Target Config: 0x000000E5
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 16 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .15010051.4436334D.420165C0.968A460F
eMMC Flash: Samsung: QD63MB
Internal RAM size: 512 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Android version: 9
Display ID: System 9.1.0.040(0EAC)
Searching for signatures...
Resetting FRP lock..
Backup saved as HUAWEI_MRD-LX1F_30-05-2020_14-23-07.dump file
FRP lock is successfully reseted!
Performed by 1.9.0.0 Software version. |