View Single Post
Old 06-03-2020, 07:56   #6 (permalink)
hiroprotagonist
Freak Poster
 
Join Date: Oct 2005
Location: Middle-Earth
Posts: 442
Member: 190274
Status: Offline
Thanks Meter: 47
Checking data...OK
Platform: LG MTK
Selected port: COM5
Selected baudrate: 921600
Selected model: X120EMW
Selected USB connection type
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM31
Mode: Emergency
Initializing flash...OK
Model ID: LM-X120EMW
Platform: mt6739
Android version: 9
SW version: LMX120EMWAT-00-V10q-LAO-COM-JAN-30-2020+0
LAF Version: 1.1
Product ID: WI12S190816008057
IMEI: 356276-10-355897-5
Target operator: LAO
Hardware: rev_10
Battery level: 72%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI A: 356276-10-355897-5
IMEI B: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk.

Continue?
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: gasima
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 124 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Writing security area...
Reconnecting phone...
Phone found at port COM31
Mode: Emergency
Initializing flash...OK
Prepairing for change protect status...
Reconnecting phone...
Phone found at port COM31
Mode: Emergency
Initializing flash...OK
Removing write protection...OK
Reconnecting phone...
Phone found at port COM31
Mode: Emergency
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Reconnecting phone...
Phone found at port COM31
Mode: Emergency
Initializing flash...OK
Prepairing for change protect status...
Reconnecting phone...
Phone found at port COM31
Mode: Emergency
Initializing flash...OK
Restore write protection...OK
Reconnecting phone...
Phone found at port COM31
Mode: Emergency
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum!
Performed by 3.0.2.02 Software version.


Still network locked. Even after attempt second time
  Reply With Quote
 
Page generated in 0.08997 seconds with 7 queries