Exe version: NCKBox AndroidMTK 2.8
Selected model: 0-By CPU ELBRUS
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM23)
Boot mode: Brom
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 150100464E58324D42
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM12)
Phone have OTP partition.
OTP IMEI: 356422080080068
Reading security, wait...
SIM[1]:
Block1(N): Unlocked (remain:0) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:5) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[2060]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
[0]All done.
