[GSM AR]

Nokia Asha 200 (RM-761) Full Flash Done

Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm761__11.64.mcusw
PPM : rm761__11.64.ppm_mec
CNT : rm761__11.64.image_mec_059J4L2_006
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.46_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 35xxxxxxxxxxxxxx2
IMEI 2 : 35xxxxxxxxxxxxx10
PCcode : 059K925

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\352xxxxxxxxxxxxxx0 2_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

===Flashing [MCU]===
File : rm761__11.64.mcusw
Image : rm761__11.64.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:07
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ...
Erase done, time : 00:02:30
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:00:36
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0xD3EE

===Flashing [PPM]===
File : rm761__11.64.ppm_mec
Image : package_mec.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41A80000 , Len : 0x00740000
Erasing, wait ...
Erase done, time : 00:00:16
Write , Start : 0x41A80000 , Len : 0x0065B518
Flashing , wait ...
Region flash done, time : 00:00:07
CRC check passed , 0x96A4

===Flashing [CNT]===
File : rm761__11.64.image_mec_059J4L2_006
Image : package_mec_059J4L2.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:02:56
Write , Start : 0x421C0000 , Len : 0x00E80000
Flashing , wait ...
Region flash done, time : 00:00:17
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:07
No write data, skip
CRC check passed , 0xD61D

Flashing done!
Total flash time : 00:07:04
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 200
Software Info: V 11.64 07-06-12 RM-761 (c) Nokia
IMEI: 3524xxxxxxxxxxxx2
PPM version : V 11.64 07-06-12 RM-761 (c) Nokia MEC
Product code: 059K925
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Resetting LifeTimer
Reset Done!
Check and Upload User Certificates ...
Total - 42 certs
Certificates found, skip upload ...
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:07:59
Connect phone on selected interface...