Direct unlock using testpoint (Software -w/o disassebling) or hardware)
1. Select "
HISILICON" platform from the tab menu in the upper left side of the software
2. Go to "
Unlock" bookmark
3. Select from drop-down list the required platform that fits to your device HiSilicon [ Kirin XXX ][v]
4. Connect the phone to PC using USB cable in the FACTORY mode - "HUAWEI USB COM 1.0" state:
- It should be detected as HUAWEI USB COM 1.0 device (VID12D1 PID3609) in the System.
- In most cases hardware Testpoint has to be used to force the device to FACTORY mode.
- Also you can use Sigma Software Testpoint - this feature allows setting the device to factory mode - HUAWEI USB COM 1.0 without disassembling the phone, and without connecting hardware testpoint to it. No need to search for the schematics of testpoints.
5. Select "
HUAWEI USB COM 1.0 device" in the ports selection tab.
6. Press "
Direct Unlock" button
7. The message "
Unlocking… Done" indicates that procedure has been completed successfully