| Selected AP file: I:\Z3X BOX\SAMSUNG\FIRMWARES\NOTE 8\COMBINATION_FA71_N950USQU7ASK1\COMBINATION_FA71_ N950USQU7ASK1\COMBINATION_FA71_N950USQU7ASK1_CL139 42288_QB27101236_REV00_user_mid_noship_MULTI_CERT. tar.md5
Platform: SAMSUNG
Selected model: SM-G950U
Please put the phone into Download Mode and connect USB cable.
To put SM-G950U into Download Mode, You have to perform the following steps:
1. Power off the phone.
2. Press and hold "Volume-" + "Bixby" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing ABL section...
ABL section has been written successfully.
Writing BKSECAPP section...
BKSECAPP section has been written successfully.
Writing XBL section...
XBL section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing HYP section...
HYP section has been written successfully.
Writing DEVCFG section...
DEVCFG section has been written successfully.
Writing PMIC section...
PMIC section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing CMNLIB section...
CMNLIB section has been written successfully.
Writing CMNLIB64 section...
CMNLIB64 section has been written successfully.
Writing KEYMASTER section...
KEYMASTER section has been written successfully.
Writing APDP section...
APDP section has been written successfully.
Writing MSADP section...
MSADP section has been written successfully.
Writing SEC section...
SEC section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing STORSEC section...
STORSEC section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing PERSIST section...
PERSIST section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing DSP section...
DSP section has been written successfully.
Firmware writing successfully completed.
Performed by 1.9.3.0 Software version. |