error, reading emmc partition Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 9 MHz
CMD Pullup Level: 445 mV
CMD Active Level: 2303 mV
EMMC Device Information :
EMMC CID: 90014A684338615030018FD3F084B623
EMMC CSD: D02700328F5903FFFFFFFFEF8E400043
EMMC Manufacture : SKHYNIX , EMMC NAME: hC8aP0 , HEX: 684338615030 , S/N: 8FD3F084 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 11/2019
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 1022 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: hC8aP0_8FD3F084_20200731_124053.extcsd
EMMC Init completed.
Scanning soft partitions
Error reading at address: 000000000000 , error: -3, DATA RCV Timeout Error ... Retry #1
Error reading at address: 000000000000 , error: -3, DATA RCV Timeout Error ... Retry #2
Error reading at address: 000000000000 , error: -3, DATA RCV Timeout Error ... Retry #3
Error reading at address: 000000000000 , error: -3, DATA RCV Timeout Error ... Retry #4
Error reading at address: 000000000000 , error: -3, DATA RCV Timeout Error ... Retry #5
Too many errors. Reading has been stopped
identify only without soft partition checked
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 9 MHz
CMD Pullup Level: 445 mV
CMD Active Level: 2299 mV
EMMC Device Information :
EMMC CID: 90014A684338615030018FD3F084B623
EMMC CSD: D02700328F5903FFFFFFFFEF8E400043
EMMC Manufacture : SKHYNIX , EMMC NAME: hC8aP0 , HEX: 684338615030 , S/N: 8FD3F084 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 11/2019
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 1022 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: hC8aP0_8FD3F084_20200731_124532.extcsd
EMMC Init completed.
why,tks |