| Really awesome speed Thank you infinity Team.
Operation : Identify [ v2.06 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : MRA58K
Display ID : J106_V04-B_Infinity_blade_V1.0_20190905
Ver. Incmt : root-103233
Ver. CodeName : REL
Ver. Release : 8.1
Sec. Patch : 2016-07-01
Build Time : 1567679979
Product Brand : android_1
Product Name : Infinity_blade
Product Device : Infinity_blade
Product Board : sp7731gea_hdr
Product Manfct : android_1
Board Platform : sc8830
Product Info : Infinity_blade
Product Model : Infinity blade
Platform Version: MOCORTM_14B_MP_7731G_W17.22.4_Debug
Project Version: sc7731g_CP0_modem
BASE Version: TM_BASE_W17.22.4
MMI Version: sc7731g_modem
HW Version: sc7731g_CP0_modem
CMP_Time : 05-31-2017 21:23:59
MODEM TAG : MOCORTM_14B_MP_7731G_W17.22.4_Debug_TM_BASE_W17.22 .4_sc7731g_CP0_modem_sc7731g_CP0_modem_sc7731g_mod em
Done!
Elapsed: 00:00:52
Operation : Format FS / Reset Settings [ v2.06 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:01:18
Operation : Read FW [ v2.06 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : MRA58K
Display ID : J106_V04-B_Infinity_blade_V1.0_20190905
Ver. Incmt : root-103233
Ver. CodeName : REL
Ver. Release : 8.1
Sec. Patch : 2016-07-01
Build Time : 1567679979
Product Brand : android_1
Product Name : Infinity_blade
Product Device : Infinity_blade
Product Board : sp7731gea_hdr
Product Manfct : android_1
Board Platform : sc8830
Product Info : Infinity_blade
Product Model : Infinity blade
AndroidVer : 8
VlnrLevel : 0x01
SC8830__android_1__Infinity_blade__8.1__J106_V04-B_Infinity_blade_V1.0_20190905__MRA58K__Infinity_b lade
Read : prodnv.img
ExtSparse : Compression ratio : 85%
Read : phase.cfg
Read : wmodem.bin
Read : wdsp.bin
Read : wnvitem.bin
Read : modem_wcn.img
Read : wcnnvitem.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : logo2.bin
Read : logo3.bin
Read : logo4.bin
Read : logo5.bin
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 88%
Make : persist.img
Read : sysinfo.bin
ExtSparse : Compression ratio : 6%
Make : cache.img
Read : recovery.img
Make : userdata.img
Read : u-boot.bin
Read : u-boot-spl.bin
Firmware size : 0x4E79385C ( 1.23 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:06:00 |