Quote:
Originally Posted by .::Mustafa::.  Code: Operation : Write Flash [ v2.15 ]
Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled
Files :17
[FL] : Set : preloader_fise6731_kaie_s_e_k.bin
[FL] : Set : recovery.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : spmfw.img
[FL] : Set : mcupmfw.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : loader_ext.img
[FL] : Set : loader_ext.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img
[FL] : Total size : 0x177DDEB8 [ 375.87 MB ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM Port (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x02
BROM : PRELOADER PORT
MODE : BQ : SEC_6739 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]
EMMC: 150100464A3235414202418EAAFF533F
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FJ25AB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00080000 [ 512.00 KB ]
USER : 0xE9000000 [ 3.64 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 8AC9529522FDFDD3F7EF1505F8769586
DA : USB : HIGH-SPEED
Boot done!
[FL] : HW verification passed!
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000002E88000
Erase : 0x0000000003688000 : 0x0000000004000000
Erase : 0x0000000008800000 : 0x0000000000A00000
Erase : 0x0000000009500000 : 0x0000000007200000
Erase : 0x0000000010C00000 : 0x0000000000200000
Erase : 0x0000000010E20000 : 0x00000000D79DBE00
[FL] : RePartition
[FL] : RePartition Ok!
[FL] : Flashing now ...
Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : RECOVERY
FAIL : SEC : PUBK AUTH MISMATCH N
ERR : 0xC002001B
ERR : SEC : PUBK AUTH MISMATCH N
ERR : 0x0088FE70|0x0088FE70
Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!
Reconnect Power/Cable! |
There is no need of use PL agent, select generic ones and do the work in BOOTROM mode.
About issue of not active ultraflash - yes, will be optimized for cheap phones, but very later.
It made for anti-sniff protection.