QIN lines and others rare things, and most common now work without problems
Code:
Operation : Identify [ v2.07 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : KTU84P
Display ID : A350_10B_DUOQIN_CUST_V02_20180726_1520
Ver. Incmt : 88
Ver. CodeName : REL
Ver. Release : 4.4.4
Build Time : 26.09.2019
Product Model : Qin 1s+
Product Brand : QIN
Product Name : sp9820e_1h10_native
Product Device : sp9820e_1h10
Product Board : sp9820e_1h10
Product Manfct : duoqin
Board Platform : sp9820e
Product Info : sp9820e_1h10
NVMng : SecurityInfo
IMEI[1] : 86xxxxxxxxxxxx
IMEI[2] : 86xxxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxxx
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4
Platform Version: MOCORTM_17B_Release_W19.14.2_Debug
Project Version: sharkle_Feature_Phone
BASE Version: FM_BASE_17B_Release_W19.14.2
HW Version: sc9820e_modem
MODEM TAG : MOCORTM_17B_Release_W19.14.2_Debug_FM_BASE_17B_Release_W19.14.2_sc9820e_modem_sharkle_Feature_Phone
UserData : STATE : PLAIN [EXTFS]
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:48
Code:
Operation : Read FW [ v2.07 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : KTU84P
Display ID : A350_10B_DUOQIN_CUST_V02_20180726_1520
Ver. Incmt : 88
Ver. CodeName : REL
Ver. Release : 4.4.4
Build Time : 26.09.2019
Product Model : Qin 1s+
Product Brand : QIN
Product Name : sp9820e_1h10_native
Product Device : sp9820e_1h10
Product Board : sp9820e_1h10
Product Manfct : duoqin
Board Platform : sp9820e
Product Info : sp9820e_1h10
AndroidVer : 4
VlnrLevel : 0x00
SP9820E__duoqin__Qin_1s+__4.4.4__A350_10B_DUOQIN_CUST_V02_20180726_1520__KTU84P__sp9820e_1h10
Read : prodnv.img
Read : phase.cfg
Read : recovery.img
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_l.bin
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Make : persist.img
Read : modem_l.bin
Read : deltanv_l.bin
Read : gdsp_l.bin
Read : ldsp_l.bin
Read : pm_sys.bin
Read : boot.img
Read : system.img
Make : cache.img
Make : userdata.img
Read : u-boot-spl.bin
Firmware size : 0x1CE450D8 ( 462,27 MiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:03:27
Code:
Open : SPD_PROG.xml
Reading package ...
Read package finished!
Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt
Patch Level : KTU84P
Display ID : A350_10B_DUOQIN_CUST_V02_20180726_1520
Ver. Incmt : 88
Ver. CodeName : REL
Ver. Release : 4.4.4
Build Time : 26.09.2019
Product Model : Qin 1s+
Product Brand : QIN
Product Name : sp9820e_1h10_native
Product Device : sp9820e_1h10
Product Board : sp9820e_1h10
Product Manfct : duoqin
Board Platform : sp9820e
Product Info : sp9820e_1h10
SECSolution : LEGACY [SS]
Operation : Flash Firmware [ v2.07 ]
Setting : Update NVRAM : True
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
PMTMng : Load PMT
PMTMng : 0x1F
PMTMng : Update PMT Ok!
NVRM : nvitem_l.bin
NVMng : Load 0x30
NVMng : Init SRC
NVMng : SecurityInfo
IMEI[1] : 86xxxxxxxxxxxx
IMEI[2] : 86xxxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxxx
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4
NVMng : Backup Ok , 0x000C61D8
NVMng : Init DST
NVMng : Rx28 : Wx27
NVMng : NVM block updated!
FSIMG : prodnv.img
CODE : recovery.img
CODE : tos.bin
CODE : tos.bin
CODE : sml.bin
CODE : sml.bin
UBOOT : u-boot.bin
UBOOT : u-boot.bin
CODE : boot_logo.bmp
CODE : fastboot_logo.bmp
CODE : gnssmodem.bin
CODE : gnssbdmodem.bin
CODE : modem_wcn.img
FSIMG : persist.img
CODE : modem_l.bin
CODE : deltanv_l.bin
CODE : gdsp_l.bin
CODE : ldsp_l.bin
CODE : pm_sys.bin
CODE : boot.img
FSIMG : system.img
FSIMG : cache.img
FSIMG : userdata.img
UBOOT : u-boot-spl.bin
ERASE : MISC
ERASE : FLASH_L
ERASE : UBOOT_LOG
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:01:19