Welcome to Octoplus Box Samsung software version 2.9.8
Card S/N : 00008E9F
-----------------------------------------------------------------------------------
To connect SM-G925I phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected AP file: C:\Users\Ali\Downloads\Compressed\G925IDVU4FRD3_G9 25IKSA4FRE1_KSA\G925IDVU4FRD3_G925IKSA4FRE1_G925ID VU4FRCA_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G925I into Download Mode, You have to perform the following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.9.8 Software version.
