Code:
Welcome to Octoplus Huawei Software v.1.2.1
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: ##2846579##
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: ##14789632##
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Your balance: 400 credit(s)
Found COM ports:
1: COM1 Communications Port
2020-09-18 10:12:25 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ELE-L09
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode put the phone in Factory or Fastboot mode and connect USB cable!
Error: No devices to ON/OFF factory mode!
ON/OFF Factory Mode failed.
Performed by 1.2.1 Software version.
2020-09-18 10:49:18 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ELE-L09
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode put the phone in Factory or Fastboot mode and connect USB cable!
Performing ON Factory Mode operation...
Checking firmware package type
Initializing remote service connection...
Downloading patch files from server...
Searching device in Upgrade mode...
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing SHA256RSA partition...
Writing CRC partition...
Writing BASE_VERLIST partition...
Writing PACKAGE_TYPE partition...
Writing XLOADER partition...
Firmware writing successfully completed
ON/OFF Factory Mode done.
Performed by 1.2.1 Software version.
2020-09-18 10:49:57 GMT -------------------------------------------------
Starting Connect
Selected phone model: ELE-L09
Searching HUAWEI USB COM 1.0 port...
Writing bootloader KIRIN980_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 026CTV191N000825
Device Model: ELE-L09
System: ELE-L09 10.0.0.195(C431E22R3P5)
FB Lock State: LOCKED
User Lock State: LOCKED
Connect done.
Performed by 1.2.1 Software version.
2020-09-18 10:50:51 GMT -------------------------------------------------
Starting Direct Unlock
Connecting to the credit server...
Your balance: 400 credits
To perform this operation you need to have: 100 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...
Direct Unlock done.
Performed by 1.2.1 Software version.
2020-09-18 10:52:26 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ELE-L09
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode put the phone in Factory or Fastboot mode and connect USB cable!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Writing bootloader KIRIN980_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 026CTV191N000825
Device Model: ELE-L09
System: ELE-L09 10.0.0.195(C431E22R3P5)
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Writing secure data...
Rebooting device...
ON/OFF Factory Mode done.
Performed by 1.2.1 Software version.